Master the Turn: Step-by-Step Guide to Tightening Skateboard Trucks
Wakeboarding isn't the only sport where maintaining your gear is crucial - skateboarding enthusiasts understand the importance of keeping their boards in prime condition too. One aspect often overlooked is the tension of the trucks, which can directly impact your safety and control on the board. Tightening your trucks involves a simple procedure, but it's essential to do it right. Let's jump in to learn how to tighten skateboard trucks like a pro.
The first step, of course, is identifying when your trucks need tightening. If you're wobbling a bit too much, or your board feels loose under your feet, it's probably time to give them a squeeze. But how do you know if your trucks aren't too tight? You should be able to gently rock your board back and forth with ease, but if it feels drifting or sloppy, or if your nose and tail lean too far, then your trucks need adjusting.
Preparation: Assemble Your Toolkit
Before you grab your skateboard, gather the necessary tools. You'll need a flathead screwdriver, an adjustable wrench, and, for some trucks, a truck wrench. Also, ensure your skateboard is on a flat and stable surface to give you better stability while working.
A word on safety - always work over a soft surface like a towel or mat, in case your tool slips and you don't want your new Doc Martens getting scratched. Wear safety glasses too, just in case debris flies up.
Pre-Ambient Tightening Check
Before you make any major adjustments, check if the bushings need some pre-ambient tightening. Loose bushings can make your board feel sloppy, but they're an easy fix. You'll need a screwdriver to do this. Push the kingpin through the baseplate, and fine-tune the bushing cap nut. If it's too loose, tighten it; too tight, loosen it. Remember, a bushing cap nut should be snug, but not so tight you can't turn your trucks.
After the bushing cap nut, check the lower kingpin nut. It should be firmly in place but not too tight. You can use an adjustable wrench for this. Follow the same principle: snug, not too tight. This will ensure the truck maintains its ability to turn.
The Main Event: Kingpin Tension
Now that you've pre-ambient tightened everything, it's time to turn to the kingpin itself. This is where your skateboard's stability and agility come from. Take your truck wrench or an adjustable wrench and adjust the kingpin nut. Turn it clockwise to tighten, counterclockwise to loosen. Keep in mind usually, quarter-turn increments are enough for fine-tuning your trucks.
Always double-check your adjustments from both sides to ensure symmetry. Turning the nut too much in one direction can throw your board's balance. Additionally, make sure both trucks are at the same tension. This ensures that your board doesn't lean to one side while you're cruising.
Fine-Tuning: Kingpin Depth and Board Lean
Besides kingpin tension, another aspect to pay attention to is the kingpin's depth. If the kingpin is too deep, it can block your board from leaning. Too shallow, and you'll be kingpin-grabbing all the time. To adjust this, gently turn the kingpin on your board until it’s neither too deep nor too shallow.
Finally, if your board leans too much to one side, it's a sign the bushings need re-centering. You can do this by slightly loosening the kingpin nut, turning the truck upside down, and gently pulling the hanger away from the baseplate. This shifts the bushings back into place.
A Word on Tightening Too Much
More isn't always better when it comes to truck tension. Over-tightening can make your board stiff and unforgiving, leading to more falls. Additionally, it can wear down your bushings and bearings quicker, leading to more frequent replacements.
Tightening too much also doesn't allow your board to lean as much as it should, which can seriously impact your performance, particularly in more technical maneuvers. It's crucial to find the perfect amount of tension that balances your board's feeling, stability, and your personal riding style.
There you have it – you're now a pro at tightening your skateboard trucks! Remember, maintaining your board involves more than just keeping your trucks tight. Regularly clean and lubricate your bearings, check your wheels and bushings, and don't forget to keep your board looking fresh. Until next time, keep shredding!