how to tighten bike pedal crank

Mastering Bike Maintenance: How to Tighten Pedal Cranks

By Sarah Brown
AD

If your bike pedal cranks are loose or wobbly, it's not only annoying but also risky, as it could cause you to lose control and potentially have an accident. Luckily, tightening bike pedal cranks is a simple task that can be done at home with the right tools. Here's a step-by-step guide to help you through the process.

Before you start, ensure you have the necessary tools. You'll need a pedal wrench (also known as a pedal spanner), a tube of grease for mountain bike pedals or de-greaser for road bike pedals, and a few rags to clean up any dirt or grease.

Preparation and Removal of Pedals

First, find a stable, flat surface to work on. This could be your backyard, garage, or even a table in your home.

AD
a person is working on a bike in a shop
a person is working on a bike in a shop
DIY Bike Repair | Solutions for Fixing a Loose Crank 🛠️
DIY Bike Repair | Solutions for Fixing a Loose Crank 🛠️
How To Remove Bike Pedals Without Pedal Wrench
How To Remove Bike Pedals Without Pedal Wrench

Start by cleaning the pedals and pedal threads with a degreaser if using road bike pedals or grease if using mountain bike pedals. This will ensure the pedals come off easily and the threads aren't damaged.

Left Pedal (Counterclockwise)

Find the left pedal, which will be smooth and not serrated. It's important to start with the left pedal to avoid damaging your crank arm.

How to Remove Bicycle Crank Without Puller
How to Remove Bicycle Crank Without Puller
How to Remove Bike Crank without Puller
How to Remove Bike Crank without Puller

Place the pedal wrench on the 15mm flat section on the pedal's shaft. Turn the wrench counterclockwise until the pedal threads fully unscrew from the crank. You might need to apply force, so be careful not to slip and hurt yourself.

Right Pedal (Clockwise)

The right pedal, which has a 9/16” pedal wrench flat, screws in clockwise. Follow the same steps as the left pedal, being mindful of the different direction.

AD

Tightening the Pedals

Now, it's time to tighten the pedals back onto the crank. Remember, it's crucial to tighten them correctly to prevent them from becoming loose again.

Before you begin, apply a small amount of grease to the pedal threads if using mountain bike pedals. This will help prevent the pedal from seizing and make it easier to remove in the future. For road bike pedals, wipe the threads clean to prevent excess grease from picking up dirt.

AD

Left Pedal (Counterclockwise)

Start by lining up the pedal squarely with the crank arm. Turn the pedal wrench counterclockwise, applying firm but steady pressure.

Tighten the pedal until it's firmly in place, but don't overtighten. You should feel the crank arm flex slightly as you tighten the pedal. If you feel grinding or hear a crunching noise, you're tightening too much and could damage the crank arm.

Right Pedal (Clockwise)

Again, line up the pedal squarely with the crank arm. Turn the pedal wrench clockwise, applying firm, steady pressure.

AD

Tighten the pedal until it's firmly in place, repeating the same process as the left pedal. Don't overtighten or force the pedal; it should spin smoothly and freely once tightened. If it doesn't, you might need to adjust the tension on your freehub body.

Well done, you've successfully tightened your bike pedal cranks! Remember to regularly check your pedals to ensure they remain tight. Next time you're out for a ride, enjoy the smooth, secure feeling of your pedals spinning smoothly underfoot. Happy cycling!

AD