Mastering the Paracord Grip: How to Tie Paracord on a Handle Like a Pro
Are you looking to enhance the grip and traction of your tool handles? Tying paracord onto your handles not only provides an improved grip but also adds a touch of style. Whether you're a DIY enthusiast, a survivalist, or just looking to upgrade your tools, this step-by-step guide will walk you through the process of tying paracord onto a handle.
Before we dive into the steps, let's gather our materials. You'll need a handle, a length of paracord (3-4 feet should be sufficient), a lacing needle (optional, but helpful for small-diameter handles), and scissors. Now, let's get started!
Preparing the Cord and Handle
The first step is to prepare your paracord and handle. Cut your paracord to the desired length and untie or cut off any pre-tied ends. With your handy tool or a sharp knife, carefully make a shallow cut in the handle at the starting point where you want to begin lacing the paracord.
If your handle is small in diameter, insert the lacing needle through the cut and thread the paracord onto the needle. This will make the following steps easier and more precise.
Basic Overhand Knot
Let's begin with a simple overhand knot to secure the paracord to the handle. Here's how:
- Make a loop in the paracord.
- Insert the end of the paracord through the loop.
- Pull both ends of the cord to tighten the knot.
Pull the knot against the handle to ensure it's secure. This will be the starting point for your paracord lacing.
Lacing the Paracord
The lacing technique we'll use is the sinnet (also known as a Solomon bar) tie. It's durable, provides good traction, and looks great. Here's how to do it:
- Bring the working end (the end you're currently using) of the paracord over the standing end (the end connected to the overhand knot) and under the handle.
- Bring the working end back over the standing end and under itself, creating a loop.
- Pull the working end to tighten the loop against the handle, and then bring it back over the standing end and under the handle again.
- Repeat this process, moving along the handle, always bringing the working end over the standing end and under the handle.
As you work, keep the tension even on the paracord to ensure a tight, secure lace. Also, vary the direction of the lacing to create a tight, attractive pattern.
Finishing the Lace
You've now laced the entire handle. The final step is to secure the end of the paracord and prevent it from unraveling.
Using the same sinnet tie, continue around the handle until you have about 2 inches of paracord left. Then, finish with a half hitch knot around the last loop. To do this, bring the working end over the standing end and under the handle, then pull it tight. Repeat this process one more time.
Take the remaining paracord, cut it off, and either burn the end to prevent fraying or melt it with a heat source. Now, you've successfully tied paracord onto your handle!
Congratulations! Your tool now sports a new, grippy handle that's both functional and stylish. Whether you're working around the house, out in the wild, or just want to upgrade your tools, this paracord handle is sure to serve you well. Happy tying!