how to tie nocking point

Mastering the Perfect Nocking Point Tie: A Step-by-Step Guide

By Christopher King
AD

Tying a nocking point on your bowstring is a crucial aspect of archery, ensuring consistent and accurate shooting. It helps position your arrow nock correctly, which influences how the arrow flies. This guide will walk you through the process, from selecting the right yarn for your nocking point to tying it and adjusting it for optimal performance.

Before we dive in, ensure you have the necessary materials: a bowstring torque tool, a pair of scissors, and some colorful, strong-diameter yarn such as Dacron. The yellower the yarn, the easier it is to see on your bowstring. A bright color also helps if you're shooting in low light conditions.

Choosing the Right Yarn for Your Nocking Point

Selecting the right yarn is vital for a functional and long-lasting nocking point. Dacron is a popular choice among archers due to its strength, longevity, and resistance to fraying. It's also soft, which reduces noise when the arrow is released.

AD
Archery 101: How to tie a nocking point
Archery 101: How to tie a nocking point
How to tie nocking points
How to tie nocking points
a close up of a blue and white toothbrush on a rope with black ropes
a close up of a blue and white toothbrush on a rope with black ropes

Consider the color as well. A bright color makes spotting your nocking point easier, especially crucial for compound bows where the arrow is barely visible in the blackकार and cable system. An inch of yarn or so, marked clearly, is all you need for your nocking point.

Length of Yarn for the Nocking Point

The length of yarn for your nocking point is crucial. Too long, and it can interfere with your arrow's flight; too short, and it won't provide a consistent nocking position. The ideal length varies, but typically, 1 to 1.5 inches (2.5 to 3.8 cm) from the serving edge is a good starting point.

a blue toothbrush hanging from a rope in the snow
a blue toothbrush hanging from a rope in the snow
The easiest way to tie a nocking point on a recurve bow
The easiest way to tie a nocking point on a recurve bow

Bear in mind that this length can change depending on your bow setup, arrow length, and your draw length. It might take some trial and error to find the perfect length for you.

Tying the Nocking Point

Once you have the right yarn, it's time to tie your nocking point. Here's a simple step-by-step process:

AD
  1. Measure and cut your yarn to the desired length. Leave a few inches extra for knotting.
  2. Using the torque tool, twist the yarn onto the bowstring, except for the last couple of inches. This is where you'll tie your nocking point.
  3. Knot the yarn using a surgeons knot or a square knot. Ensure the knot is tight and secure.
  4. Pull the slack yarn back onto the bowstring and secure it with a half hitch or two, about a quarter-inch away from the knot.
  5. Use the torque tool to twist the yarn onto the bowstring, up to the serving edge. Be careful not to twist it too tightly; this can stress the yarn and cause it to fray or break.
  6. Trim any excess yarn, leaving about an inch or so for the nocking point.

Adjusting and Fine-Tuning Your Nocking Point

After tying your nocking point, it's essential to check and adjust its position. A nocking point's ideal position varies per archer, affecting arrow flight, consistency, and accuracy.

The general consensus is to place the nocking point approximately 4 to 10 inches (10 to 25 cm) away from the serving wheel, depending on your bow's idiosyncrasies and your arrow's built. However, the best way to find the optimal position is through practice and testing.

Checking Arrow Spine

When adjusting your nocking point, consider your arrow's spine. The spine should be straight when your bow is at full draw, with the nock resting on the nocking point. Too much spin can lead to incorrect arrow flight, while too little may cause the nock to slip off the string.

AD

To test your nocking point's position, shoot a few arrows and observe the flight. If the arrows fly consistently and true, you're in the right area. If not, adjust your nocking point slightly and try again. It may take some time to find the sweet spot, but the difference in accuracy and consistency will be well worth the effort.

Remember, nocking points aren't one-size-fits-all. Every archer, bow, and arrow setup is unique. Don't be afraid to experiment and adjust until you find the optimal nocking point for your specific needs. Happy shooting!

AD