how to thread a brother serger

Mastering Serger Threading: Brother Sewing Machine Step-by-Step Guide

By David Taylor
AD

Mastering your Brother serger is a rewarding skill that opens up a world of professional-looking sewing projects. One of the first steps in learning to use this powerful tool is to understand how to thread it correctly. Don't worry, we've all been there - Threading a serger can seem daunting at first, but with some patience and practice, it's easy to master. Let's dive in and learn how to thread a Brother serger efficiently.

First, ensure your serger is unplugged for safety. Then, lay out your thread spools and the cone or pre-wound bobbin thread. You'll need Looper Thread (usually white), Upper Looper Thread (usually purple), and Lower Looper Thread (usually yellow) for most Brother sergers. Also, have your seam guide (usually orange) and take up lever at hand.

Prepare Your Serger for Threading

Starting with a clean slate is essential. Remove any previous threads and ensure there's no lint buildup in your serger.

AD
someone is using a sewing machine to sew on the side of a piece of fabric
someone is using a sewing machine to sew on the side of a piece of fabric
a sewing machine sitting on top of a wooden table next to thread spools
a sewing machine sitting on top of a wooden table next to thread spools
The Easiest Way to Thread Your Serger Machine Like a Pro!
The Easiest Way to Thread Your Serger Machine Like a Pro!

Now, install your cone or pre-wound bobbin thread onto the take-up lever. Ensure the thread runs through the thread take-up guide and doesn't tangle while spinning. Place the take-up lever in the 'neutral' position - it should be level with the bed of the machine.

Thread the Lower Looper

The lower looper is the first thread we'll guide through your serger. Grab your Lower Looper Thread (usually yellow) and bring it from the left side of the machine, near the blade.

a white sewing machine with the words how to thread easy on it's side
a white sewing machine with the words how to thread easy on it's side
Detailed Brother 1034DX Threading | Serger Threading | How to thread a serger
Detailed Brother 1034DX Threading | Serger Threading | How to thread a serger

Feed the thread through the silverревнов between the presser foot and the deck, then move towards the right, following the path indicated on your serger's body. Be sure to keep the thread away from the blade and out of the way of the take-up lever.

Thread the Upper Looper and Serger Needle

Now, it's time to thread the Upper Looper Thread (usually purple) and the Serger Needle. Bring the thread from the left side, near the tension discs.

AD

Feed the thread behind the tension discs, then through the slot on top of the tension discs, and finally into the awesome slot for the thread guide on the needle plate. Use theprovided thread guide to help position the thread in the needle's throatplate. Finally, bring the thread towards the needle from the back.

Thread the Loopers

Your Brother serger has two loopers - the upper and the lower. For each looper, follow these steps:

Release the looper cover by pressing the release button and lifting the cover up. You'll see a silver thread guide. Insert your thread (lower for the lower looper, upper for the upper looper) into the groove of the thread guide and bring it around the looper, then push it into the hole in the looper post.

AD

Thread the Loopers: Detailed Steps

For the lower looper, insert your thread (yellow) into the lower roller thread guide from front to back. Bring it around the looper and enter the hole in the looper post's right side.

For the upper looper, insert your thread (purple) into the upper roller thread guide from front to back. Bring it around the looper and enter the hole in the looper post's left side.

Thread the Differential Feed Assembly

Now, guide your thread (both upper and lower loops together) into the left slot of the differential feed assembly. Follow the path of the threading diagram on your serger, keeping the thread away from the blade.

AD

Pass the thread through the right slot in the differential feed assembly, then pull the thread through and release the differential feed assembly. Use the take-up lever to gently take up the slack in the thread.

Connect All Threads and Test Your Serger

With all threads guided through their respective paths, it's time to connect them and test your work.

Guide the Upper Looper Thread (purple) through the guide slot on the upper looper cover and pull down the cover. Then, guide the Looper Thread (white) through the guide slot on the lower looper cover and pull down the cover.

Wind the Thread onto the Take-Up Lever

Wind the thread onto the take-up lever lightly, ensuring it's not tangled. The thread should follow the natural direction of the take-up lever's movement.

Rotate the take-up lever a few times to ensure the thread winds smoothly. If the thread pulls too tightly or gets tangled, reverse the take-up lever's movement, gently untangle the thread, and try again.

Now, gently pull all threads towards the blade and check for any tension issues. Adjust threads as necessary, ensuring they're not too loose or too tight. Gently test your serger in various stitch types, and you're ready to create beautiful, professional-looking seams!

Happy sewing! With practice, you'll become a serger threading pro. But remember, always read your specific Brother serger model's manual for the most accurate instructions tailored to your machine. Keep your skills sharp and your creativity flowing with the powerful Brother serger!

AD