how to test the coil on a lawn mower

Lawn Mower Coil Test: Step-by-Step Guide

By Kevin Walker
AD

Imagine this scenario: Your once-powerful lawn mower is now struggling to cut through your lush grass, and you suspect that the issue might lie with the coil. But how can you be sure? Testing the coil on a lawn mower might seem like a daunting task, but with the right steps, it's a breeze. Let's delve into a comprehensive guide on how to test the coil on a lawn mower, ensuring you get the best results with minimal effort.

Before we dive into the step-by-step process, it's crucial to understand that the coil in your mower's ignition system is responsible for generating a spark that ignites the fuel. When the coil fails, it can lead to various issues, including a no-start condition, weak engine performance, or even misfiring. So, knowing how to test the coil is a vital skill that every lawn mower owner should possess. Now, let's get started.

Preparation: Safety First

Before you begin, safety should be your top priority. Disconnect the spark plug wire from the spark plug to prevent the engine from accidentally starting. Also, make sure the mower is on a flat surface and the blades are secure to avoid any injuries.

AD
How to Test a Lawnmower Coil
How to Test a Lawnmower Coil
How To Test And Troubleshoot Ignition Coils - Hunker
How To Test And Troubleshoot Ignition Coils - Hunker
How To Test a Briggs And Stratton Lawnmower Coil Using a Multimeter
How To Test a Briggs And Stratton Lawnmower Coil Using a Multimeter

Once you've ensured safety, gather your tools. You'll need a multimeter, a ratchet and a socket wrench to remove the coil, and a screwdriver to remove the ignition module (if necessary). Having a test light or a continuator can also be handy but isn't strictly necessary.

Testing the Coil: Understanding the Process

Before you dive into the actual testing, it's essential to understand the process. The basic idea is to check if the coil is producing the correct voltage and current when the ignition is turned on and off. Let's break it down into simple steps.

How To Test And Troubleshoot Ignition Coils - Hunker
How To Test And Troubleshoot Ignition Coils - Hunker
How to Test A Lawn Mower - Ignition Coil Magneto With A Multimeter #easy
How to Test A Lawn Mower - Ignition Coil Magneto With A Multimeter #easy

There are several ways to test a lawn mower coil, but we'll focus on the most common methods using a multimeter and a simple voltage check.

Using a Multimeter for Coil Resistence and Inductance

A multimeter is a versatile tool that can help you test the resistance and inductance of the coil. To do this, set your multimeter to the ohm (Ω) setting. Here's how:

AD
  • Disconnect the coil from the ignition system.
  • Touch the multimeter probes to the coil's output and input terminals. The resistance should read between 1kΩ to 4kΩ. If it's higher or lower, the coil is faulty.
  • To test the inductance, set your multimeter to the Ohms setting with the lowest XL/L range (usually 10kΩ). The reading should be over 70mH. If it's lower, replace the coil.

Checking the Coil with a Simple Voltage Test

Here's a simpler method that doesn't require a multimeter. You'll need a test light or a 12-volt battery and a jumper wire.

  1. Locate the ignition system's implementation in your mower. It's usually under the hood or on the engine block.
  2. Insert the jumper wire into the igniter's coil terminal and touch it to the battery's positive terminal.
  3. If the test light or jumper wire glows or sparks when you touch it to the battery, the coil is working correctly.

Interpreting Your Test Results

Based on your test results, you should now have a good indication of whether your mower's coil is functioning correctly. If your coil passed both tests, there's no need for replacement. However, if it failed either test, it's time to replace the coil.

Remember, replacing a faulty coil is a simple and inexpensive repair that can save you from more extensive damage to your lawn mower's ignition system. It's always better to address potential issues early to keep your mower running smoothly.

AD

Replacing the Coil: A Smooth Transition

Once you've determined that the coil needs to be replaced, the process is straightforward. Remove the old coil, ensuring you're careful with the connecting wires. Then, install the new coil, making sure it's properly secured and connected. Finally, test the mower to ensure the replacement was successful.

Always refer to your mower's manual for specific instructions on replacing the coil, as the process may vary slightly depending on the make and model of your mower.

And there you have it! A comprehensive guide on how to test the coil on a lawn mower, complete with safety tips, step-by-step testing processes, and helpful advice on interpreting your results. Now you're equipped to keep your lawn mower's ignition system in tip-top shape, ensuring your lawn stays lush and well-maintained, season after season. Happy mowing!

AD
AD