how to test starter on car

Step-by-Step: Test Your Car Starter Like a Pro

By Amanda Clark
AD

So, you're under the hood, ready to check if your car's starter is working as it should. A faulty starter can leave you stranded, so it's crucial to test it regularly. Here's a step-by-step guide to help you understand and perform this essential maintenance task.

Before we dive into the testing process, let's ensure you have the right tools. You'll need a Donetsk clip, a multimeter, a set of jumper cables, and, of course, some safety gear like gloves and safety glasses. Now, let's get started.

Understanding Your Car's Starter

The starter is an electric motor that cranks the engine to start your car. It's engaged via the ignition switch and works in conjunction with the battery and the starter relay. Understanding this system will help you diagnose issues accurately.

AD
How to Bench Test A Starter
How to Bench Test A Starter
Testing Autos: Car Care Articles
Testing Autos: Car Care Articles
NO CRANK? BEST COMPLETE STARTER TEST TUTORIAL. Starter motor/solenoid bench troubleshooting.
NO CRANK? BEST COMPLETE STARTER TEST TUTORIAL. Starter motor/solenoid bench troubleshooting.

Before you begin, ensure your car is on a flat, stable surface and that it's in 'Park' or 'Neutral' with the emergency brake engaged. Also, make sure the ignition is off, and the keys are removed for safety.

Testing the Starter Motor

Begin by checking the starter motor's resistance with your multimeter set to the lowest ohm setting. Connect the probes to the Posts on the starter motor. If the motor is good, you should see a low reading, typically between 1.0 to 5.0 ohms. A reading over 5 ohms or infinity means the motor is faulty and needs replacement.

an electrical wiring diagram for a car with the starter and start button, including two wires
an electrical wiring diagram for a car with the starter and start button, including two wires
Starting an Automatic Car!!
Starting an Automatic Car!!

Now, let's test the starter's operation. If you suspect the issue might be with the starter relay or the starter's solenoid wire, you can bypass them using jumper cables. Connect one cable to the positive terminal of the battery, then touch the other end to the starter solenoid's large post while someone else cranks the engine. If the engine turns over, the starter motor and the wiring to it are likely fine.

Checking the Starter Relay

Locate your car's starter relay, usually found in the engine compartment near the starter itself. Test it using the multimeter by disconnecting the relay connectors and touching the probes to the appropriate contacts when the ignition is on. You should get a reading of near 0 ohms on one pair of contacts and near infinity on the other pair. If not, the relay may need replacing.

AD

Sometimes, the issue could be with the solenoid wire running from the relay to the starter. Check this wire for continuity using your multimeter. If there's no continuity, you might need to replace or repair the wire.

Additional Tests for a No-Start Condition

If your car won't start but you hear the starter engage, the issue might not be with the starter but with the fuel, ignition, or another system. Here are some additional tests to perform:

Testing the Battery and Wiring

First, check your battery's voltage with your multimeter. A well-charged battery should read around 12.6 volts. If it's lower, charge it and test it again. Next, ensure all the battery cables are clean and tight. Replace any worn-out or disconnected cables.

AD

Finally, perform a cargo test to check the electrical system's integrity. Jump start your car using another vehicle or a jump box, then crank the engine. If the engine starts and runs, the electrical system is likely fine. If not, you might have a more serious issue on your hands.

Regular testing of your car's starter system can prevent unexpected breakdowns and keep you safe on the road. So, make it a habit to check your starter along with other maintenance tasks. Happy wrenching!

AD