Hand Test Shocks: Simple DIY Guide
Introduction to testing your car's shocks manually reveals an essential part of your vehicle's safety and handling. Shocks, also known as struts, absorb the impact from bumps and vibrations, allowing you to drive smoothly and safely. Testing your car's shocks or struts regularly can extend their life and prevent potential accidents. So, let's dive into a step-by-step guide on how to test shocks by hand.
Before you start, make sure you have adequate space, proper lighting, and your vehicle is not on any incline. You will also need some basic tools like a jack, jack stands, and wheel wedges. Let's get started!
Inspecting Your Vehicle's Shocks Visually
Begin by looking at your shocks from various angles. Squeeze them gently and observe their movement. A healthy shock should extend and compress smoothly without binding or leaking fluid.
Check the oil seal at the bottom and the shaft for signs of leakage. If you notice any oil leaks, it's a strong indication that the shock has failed and needs immediate replacement.
Testing Shocks with a Bounce Test
A simple test you can perform to diagnose worn-out shocks is the bounce test. Here's how:
Press down firmly on each corner of your vehicle, about 12 inches away from the tire. Count how many bounces it takes for the suspension to stop moving. A good shock should absorb the impact in no more than three bounces. If the suspension continues bouncing after that, it's a sign of a faulty shock.
Pressure Test on the Shocks
Another method to test your car's shocks is by pressing down on the hood of the vehicle. Upon releasing pressure, the shock should quickly return to its original position.
If the shock doesn't return to its original position quickly and smoothly, or if it feels stiff, it may be worn out or damaged and needs to be replaced.
Performing a Diagnosis on the Shocks while the Car is Lifted
For a more thorough inspection, you'll need to lift your car using a jack and support it securely on jack stands. This will allow you access to the shocks for a more detailed assessment.
With the car lifted, observe the shocks closely. Look for cracks, damage, or any unusual wear. If there's any, it's a clear sign that the shock needs to be replaced.
Checking the Shock's Oil Level
Once the car is lifted, attempt to compress the piston into the oil cylinder. Observe how much oil comes out and how quickly it returns.
If the oil doesn't return at all, escapes very slowly, or the shock makes a grinding noise, it is likely that the internal piston seal has failed, and the shock isysterous.
Compressing the Shock Manually and Observing
Besides checking the oil level, you can perform a quick test by holding the shock tightly at the top of the piston and bottom of the cylinder. Try to compress and extend the shock several times.
If you feel resistance or hear any unusual noises, it suggests that the shock is in a poor condition and should be replaced immediately.
After following these steps, you should have a pretty good idea about the condition of your car's shocks. The knowledge gained from testing your car's shocks by hand can significantly enhance your vehicle's safety and performance. If you find that your shocks need replacing, consider taking it to a professional for a more comprehensive evaluation and replacement service. Regular inspections are the key to maintaining your car's safety and reliability.