how to test lawn mower solenoid

Test Lawn Mower Solenoid: A Step-by-Step Guide

By David Lopez
AD

If your lawn mower fails to start or exhibits intermittent starting issues, a faulty solenoid could be the culprit. The solenoid is an electromagnetic switch that controls the flow of current to your mower's engine. Testing it involves a simple, straightforward process that requires no advanced electrical knowledge.

Before you begin, ensure you have the following safety precautions in place: unplug the spark plug wire to prevent the engine from starting, and wear safety glasses to protect your eyes from debris or chemicals. Now, let's dive into the step-by-step process of testing your lawn mower solenoid.

Understanding Your Lawn Mower Solenoid

Familiarizing yourself with the solenoid's components is crucial before initiating the test. The solenoid consists of an electrical coil, a metal core, and a metal blade or plunger. When electrical current is applied, the coil magnetizes the core, causing the plunger to move and close the engine's fuel flow.

AD
How To Check The Solenoid On A Riding Lawn Mower - Hunker
How To Check The Solenoid On A Riding Lawn Mower - Hunker
​How to Tell Your Lawn Mower Starter Solenoid is Bad: SOLVED! - Powered Outdoors
​How to Tell Your Lawn Mower Starter Solenoid is Bad: SOLVED! - Powered Outdoors
How to Test lawn Mower Solenoids
How to Test lawn Mower Solenoids

There are two types of solenoids in lawn mowers: rubber-diaphragm and powdered metal. They function similarly but have different internal structures. For the purpose of this article, we'll focus on the rubber-diaphragm-type solenoid, which is the most common.

Identifying the Solenoid

To locate the solenoid, follow the fuel line from the gas tank to the engine. It will be positioned near the carburetor or directly on it. The solenoid has an electrical wire connected to it, which you shouldtrace back to the wiring harness. Once you've found it, mark its position to ensure you can reinstall it correctly.

How To Check The Solenoid On A Riding Lawn Mower - Hunker
How To Check The Solenoid On A Riding Lawn Mower - Hunker
How to Test a Lawn Mower Solenoid (Simple Method)
How to Test a Lawn Mower Solenoid (Simple Method)

Before removing the solenoid, take a close look at its electrical connector. Some connectors have individual wires for the solenoid's electrical coil, while others share a wire with the primer bulb. Knowing this will help you understand the solenoid's electrical circuit during the test.

Preparing the Solenoid for Testing

Carefully unplug the electrical connector from the solenoid. If the connector has individual wires, gently pull the connector out; if it shares a wire with the primer bulb, cut the wire about an inch from the connector and strip about 1/4 inch of insulation from each end. Strip the wire on the solenoid end for about 3/4 inch.

AD

Insert the stripped wire into the connector's spark plug hole, ensuring it's fully inserted and secured. The wire should now function as a makeshift spark plug wire to complete the electrical circuit.

Testing the Lawn Mower Solenoid

Now that you've prepared the solenoid, it's time to test its functionality. You'll need a 12-volt battery, jumper cables, and a continuity tester or multimeter for this part. Using a continuity tester or multimeter ensures an accurate reading and simplifies the testing process.

If you don't have access to a continuity tester or multimeter, you can still test the solenoid using jumper cables and a 12-volt battery. However, this method is less precise and should be considered an initial diagnostic step before performing a thorough multimeter test.

AD

Using Jumper Cables and a 12-Volt Battery

Connect one end of a jumper cable to the battery's positive terminal and the other end to the solenoid's electrical connector. Start the mower's engine by pulling the starter rope. If the solenoid is functional, you should hear a click, indicating that the electrical coil has activated and shut off the fuel flow.

Note: If you don't hear a click or the engine fails to start, the solenoid is likely faulty and needs replacement. Also, the battery could be low on charge, so ensure it's fully charged before attempting the test again.

Using a Continuity Tester or Multimeter

Set your continuity tester or multimeter to the lowest ohms setting. Touch the probes to the solenoid's electrical terminals. A functional solenoid should exhibit low resistance (typically 3-4 ohms) when the starter is engaged, and high resistance (infinite or several thousand ohms) when the starter is disengaged.

AD

If the tester or multimeter indicates infinite resistance in both positions, the solenoid is likely faulty. Additionally, if resistance is low in both positions, the solenoid is shorted and needs replacement.

If your test results confirm that the solenoid is faulty, replace it with a new one that's identical to the original. Ensure you follow the manufacturer's instructions for proper installation and reconnection of the electrical connector. After replacing the solenoid, test the mower's starting mechanism to confirm that the problem has been resolved.

Testing your lawn mower solenoid involves straightforward steps that require minimal electrical knowledge. By following this guide, you can accurately diagnose and address any starting issues related to the solenoid. Regular maintenance and prompt addressing of electrical problems ensure optimal performance and longevity of your lawn mower. Enjoy your well-maintained lawn and happy mowing!

AD