how to test dishwasher inlet valve

Step-by-Step: How to Test Your Dishwasher's Inlet Valve

By Anthony King
AD

Dishwashers, a modern Kitchen staple, require regular maintenance and troubleshooting to ensure they remain efficient and effective. A malfunctioning dishwasher inlet valve can lead to poor performance or complete failure of the appliance. This article will guide you through testing your dishwasher inlet valve, a critical step in diagnosing and resolving any issues with your dishwasher.

Before you begin this process, ensure you have the necessary tools; a multimeter, socket wrenches, and safety gloves. Always remember to cut off the power supply to your dishwasher before starting any operation to prevent electric shocks.

Understanding the Dishwasher Inlet Valve

The dishwasher inlet valve is a crucial part of your appliance, regulating water flow into the dishwasher. It opens and closes to allow water into the machine at various stages of the cleaning cycle. Understanding its function is key to effectively testing it.

AD
How To Test A Dishwasher Water Inlet Valve (The Right Way)
How To Test A Dishwasher Water Inlet Valve (The Right Way)
DIY Whirlpool/KitchenAid/Maytag Water Inlet Valve Replacement Guide WP99001359
DIY Whirlpool/KitchenAid/Maytag Water Inlet Valve Replacement Guide WP99001359
Dishwasher Repair: How to Troubleshoot & Fix a Dishwasher
Dishwasher Repair: How to Troubleshoot & Fix a Dishwasher

Inlet valves are typically made up of two solenoids; one for hot water and one for cold. When the dishwasher receives a signal to start a cycle, the solenoid opens to allow water to enter the machine. After the required amount of water has been admitted, the solenoid closes, stopping the water flow.

Identifying the Inlet Valve

Locating the inlet valve is the first step. In most cases, the valve is situated near the bottom of the dishwasher, where the water supply hose connects. Consult your user manual for specific details, as the location can vary depending on the make and model of your dishwasher.

How to replace a dishwasher water inlet valve | Repair guide
How to replace a dishwasher water inlet valve | Repair guide
Why Won't My Dishwasher Fill With Water? | PartSelect.com
Why Won't My Dishwasher Fill With Water? | PartSelect.com

Once you've located the valve, disconnect the wires connected to it. Ensure you label these wires before disconnecting to simplify the reconnection process later.

Checking for Leaks

Before testing the valve with a multimeter, perform a visual check for leaks. If you notice water around the valve, there's a good chance that it's the source of the problem. Tightening the valve may resolve the issue, but if it's leaking excessively or you hear water running when the dishwasher is off, a replacement might be necessary.

AD

If there are no visible leaks, proceed to the next step, which involves using a multimeter to test the solenoids.

Testing the Dishwasher Inlet Valve with a Multimeter

Testing the inlet valve solenoids with a multimeter is a straightforward process that can help you determine if the valve is working correctly or if it needs replacing.

First, ensure your multimeter is set to the continuity test mode (often denoted by a diode symbol or ∞). This mode sends a small electrical current through the circuit and measures the resistance. When the valve is working correctly, the multimeter should show infinite resistance (or open circuit) when the valve is closed and low resistance (or closed circuit) when it's open.

AD

Testing the Hot Water Solenoid

With the wires disconnected from the valve, attach one multimeter probe to each terminal. Ensure you match the correct multimeter lead with the correct valve terminal, looking at the dishwasher wiring diagram if needed. With the valve closed (i.e., the dishwasher off), the multimeter should show infinite resistance.

Now, simulate power to the valve by applying 12V to the terminal whilst keeping the multimeter attached. The reading should now show low resistance. If it doesn't, the hot water solenoid is faulty and needs replacing.

Testing the Cold Water Solenoid

Repeat the same process with the cold water solenoid, remembering to switch the valve's position if necessary. If the multimeter readings vary from the expected results, the cold water solenoid might be at fault.

AD

If both solenoids pass the test, the problem likely lies elsewhere in the system. If not, you'll need to replace the faulty solenoid(s). Before installing the new valve or solenoid, ensure you've safely discarded the old one according to your local regulations.

Regular maintenance and troubleshooting are key to keeping your dishwasher running smoothly. If you're unsure about any aspect of the process, don't hesitate to seek professional help. Now that you know how to test your dishwasher inlet valve, you're well on your way to keeping your kitchen running like a well-oiled machine.

AD