how to test a washing machine motor with a multimeter

Step-by-Step Guide: Test Washing Machine Motor with Multimeter

By Nicole Harris
AD

Did your favorite shirt not come out as crisp as you expected after a wash? Chances are, your washing machine's motor might be the culprit. But how do you diagnose the issue? That's where a multimeter comes in. This versatile tool can help you test your washing machine motor and potentially save you a hefty repair bill. Let's dive into how to test a washing machine motor with a multimeter.

Before we proceed, ensure safety first. Unplug the washing machine from the power source. Wear safety gloves and use caution when handling the machine's components. Now, let's get started.

Understanding Your Washing Machine Motor

Washing machines use an induction motor or a universal motor, depending on the model. Both types rely on electrical principles to function. By using a multimeter, we can check the resistance, continuity, and voltage to diagnose any electrical faults.

AD
How to test washing machine motor with multimeter
How to test washing machine motor with multimeter
an image of a machine motor that is not working
an image of a machine motor that is not working
DIY Motor Testing: Is Your Washer Motor Junk? | 2026 Tech
DIY Motor Testing: Is Your Washer Motor Junk? | 2026 Tech

You'll need a multimeter with at least the following functions: resistance (Ohms), continuity tester, and voltage tester. Additionally, get a steady hand, a bit of patience, and let's roll up our sleeves.

Resistance and Continuity Test

First, let's test the resistance and continuity of the motor's windings. These tests check if the motor's coils are intact and not shorted or open.

How To Test A Whirlpool/Maytag Washer Motor!
How To Test A Whirlpool/Maytag Washer Motor!
How to Find the Pins of a Washing Machine Motor
How to Find the Pins of a Washing Machine Motor

Set your multimeter to the Ohms (resistance) setting. Touch one probe to the motor's starting wire (identified in your machine's wiring diagram) and the other to each of the motor's terminals in turn. Write down the resistance values. They should be consistent, typically between 5 to 20 Ohms for a washing machine motor. If the resistance is infinite, one of the coils is open (broken). If the resistance is low or zero, the coil is shorted.

Checking for Shorts With the Continuity Beep

Set your multimeter to the continuity setting. Touch one probe to each terminal. If the motor is good, you should hear a beep. If there's no beep, or the beep is constant (which means continuity all the time), your motor has a short circuit or is open.

AD

Testing the Motor's Voltage

Now, let's test the motor's voltage. This check will reveal if there's a problem with the motor's electrical supply.

Set your multimeter to the appropriate voltage setting, usually between 200 to 1000 volts. Touch the black probe to the motor's neutral wire (usually white or gray) and the red probe to the motor's live wire (usually brown or black). Read the voltage. It should match the voltage specified in your machine's wiring diagram, typically 220-240V AC for most washing machines.

Checking for Phasing Issues

Induction motors have two windings (called runs). If both runs are connected together, it's called a wye (Y) connection. If the runs are connected end-to-end, it's a delta (Δ) connection. To check for phasing issues, measure the voltage between the motor's live wire and each terminal. The voltage should be equal for all terminals if the motor is correctly phased.

AD

If your motor doesn't pass any of these tests, it's time to replace it. Always purchase a compatible replacement and remember that professional installation may be required to ensure your safety.

Testing your washing machine motor with a multimeter can indeed save you a service call. However, if you're not comfortable performing these tests yourself, don't hesitate to call a professional. Happy repairing, and remember, safety first!

AD