How to Test a Flasher Relay: Step-by-Step Guide
Flasher relays are integral components in vehicle systems, controlling various lights and indicators. When they malfunction, safety can be compromised. Testing a flasher relay, therefore, is a crucial task for both mechanics and DIY enthusiasts. This guide walks you through the process, ensuring clear, step-by-step instructions for a comprehensive understanding.
Before proceeding, familiarize yourself with the relay's function, its location in the vehicle's wiring diagram, and the specific model if possible. This article assumes you're working on a typical 12V vehicle flasher relay, found in applications like turn signals and hazard lights.
Understanding Flasher Relays
Flasher relays are essentially switches that allow electricity to flow through different paths. They house a bimetallic strip, which heats up and cools down, interrupting the electrical circuit to create a flashing effect. Understanding this mechanism is key to decoding their electrical behavior during tests.
Several symbols represent flasher relays in wiring diagrams. Here, we'll focus on the most common, a box with a wavy line indicating the flashing action. Familiarize yourself with other symbols to ensure accurate identification.
Before You Begin: Gather Your Tools
To test a flasher relay, you'll need a few simple tools: a flathead screwdriver, a multimeter, electrician's gloves, and safety glasses. Ensure your multimeter is set to the 'DCV' (direct current voltage) or ' continuity' setting for initial tests. If testing an inline relay, you'll also need a fused jumper wire.
Safety is paramount when working with electrical systems. Disconnect the battery or ensure the ignition is off before starting. Always use insulated tools to prevent short circuits, and keep your work area clean and well-lit.
Locating the Flasher Relay
The flasher relay is often found in the vehicle's under-hood fuse box or under the dashboard. Consult your vehicle's repair manual for its specific location. Once found, unplug the relay from its electrical connector, being careful not to damage the pins.
Most relays have a plastic housing and four male spade terminals. The spade that connects to the battery's positive terminal is usually marked with a + sign or the word 'ignition.' The other terminals correspond to individual lights, such as turn signals or hazard lights.
Testing the Flasher Relay: Step-by-Step
With the relay unplugged and your tools at hand, it's time to test its functionality. We'll use both continuity and voltage tests to assess its performance.
Testing should be conducted in a logical sequence. First, we'll check the relay's mechanical operation. Then, we'll perform electrical tests to ensure it flashes correctly and isn't affected by voltage changes.
Mechanical Test: Check for Welded Contacts
Start by gently flexing the relay back and forth. Listen and feel for a clicking sound, indicating the relay's internal contacts are open and closed. If there's no clicking, the contacts may be welded together, preventing the relay from functioning properly. Unfortunately, there's no easy repair for welded contacts; replacing the relay is usually the best course of action.
If the relay clicks, proceed to the electrical tests. If not, replace it and retest to confirm the new relay operates as expected.
Electrical Tests: Continuity and Flashing
First, set your multimeter to the continuity setting. Touch the probes to the relay's pins, ensuring you don't short across any exposed metal. Listen for the beep indicating an continuous electrical path. There should be continuity between the 'ignition' and 'battery' terminals, and no continuity across the other pins. If your multimeter doesn't signal continuity, the relay may be faulty.
Next, set your multimeter to read DCV (direct current voltage). With the ignition on, touch the probes to a pair of pins connected to the same light circuit, such as the left and right turn signals. You should read around 12V. While measuring, manually activate the turn signal. The voltage should drop and rise rhythmically, indicating the relay is flashing correctly.
Testing an Inline Flasher Relay
Some vehicles use inline flasher relays, which can be challenging to test. First, unplug the relay from its harness, then use a fused jumper wire to connect the harness directly to the battery. Activate the turn signal; if it functions properly, replace the relay.
If the turn signal still doesn't function, test the relay using the same methods as above, ensuring you've properly connected the jumper wire and your multimeter probes.
The final test involves reattaching the relay to its harness and checking the vehicle's lights, both by observing and using a multimeter. If everything functions as expected, congratulations! You've successfully tested and replaced your vehicle's flasher relay. If not, revisit your diagnostic efforts, ensuring no other components are faulty.