how to test a blower motor in a car

How to Test a Blower Motor in a Car: A Step-by-Step Guide

By Ashley Miller
AD

Experiencing decreased airflow or strange noises from your car's ventilation system? Your blower motor might be at fault. The blower motor is responsible for pushing air through your car's heating, ventilation, and air conditioning (HVAC) system. Here's a comprehensive guide on how to test a blower motor in your car to diagnose the issue and ensure your cabin comfort is reinstated.

Before we dive into the testing process, it's essential to understand that blower motors can fail for several reasons. These include frayed wiring, worn-out bearings, or even a broken motor. They are, however, repairable or replaceable, so let's get started.

The Pre-Test Check

Before you start testing, ensure your car is off and the key is removed from the ignition. This safety precaution is crucial as you'll be working with electrical components. Additionally, it's a good idea to disconnect the negative battery cable to prevent any electrical shorts.

AD
How to Replace a Blower Motor in Your Car And Diagnosing
How to Replace a Blower Motor in Your Car And Diagnosing
3 Signs Of A Bad Blower Motor Resistor (How To Test & Replacement Cost)
3 Signs Of A Bad Blower Motor Resistor (How To Test & Replacement Cost)
HOW TO TEST HEATER BLOWER MOTOR FAN. HEATER AC FAN NOT WORKING FIX
HOW TO TEST HEATER BLOWER MOTOR FAN. HEATER AC FAN NOT WORKING FIX

Next, locate your blower motor as it's usually found in your dashboard, behind the glove compartment, or under the dashboard, near your HVAC system. Accessing it may involve removing a few panels, so you might need some basic tools like a screwdriver or a panel removal tool.

Visual Inspection

The first step in testing your blower motor is a visual inspection. Look for any visible signs of damage, such as frayed wires, burned-out connectors, or broken components. If you spot any of these, it could indicate a faulty motor.

How to fix a Noisy Blower Motor AC Heat Fan
How to fix a Noisy Blower Motor AC Heat Fan
The Expert’s Guide to Blower Motor Wiring Diagrams
The Expert’s Guide to Blower Motor Wiring Diagrams

Additionally, gently wiggle the wiring harness connected to the blower motor. If the problem lies in the wiring, you might hear or feel the motor running or rattling during this process. If it does, you've likely found the issue.

Resistance Test

A resistance test involves using a multimeter to measure the resistance across the blower motor's terminals. This test can help identify a blown fuse, broken wires, or a faulty motor.

AD

Disconnect the blower motor from its electrical connections and set your multimeter to measure resistance. Touch one probe to each terminal of the motor. If the multimeter reads infinite resistance or a low reading (less than 5 ohms), the motor is likely faulty and needs replacing.

Resistor Check

The blower motor's speed is controlled by a resistor. If the resistor fails, the motor might not work at all or could run at full speed only. To check the resistor:

  • Disconnect the electrical connectors from the resistor.
  • Set your multimeter to continuity mode and touch the probes to the resistor's terminals.
  • A working resistor should show continuity (low or zero resistance). If it doesn't, the resistor is faulty.

Conductance Test

Sometimes, the issue might not be with the blower motor or resistor but with the electrical connections. To test the connections:

AD
  • Reconnect the blower motor and resistor.
  • Turn the ignition to the 'On' position.
  • Listen or feel for the motor running. If it works but the air isn't blowing, the issue might be with the fan or the blower fan motor itself.

In the pursuit of maintaining your car's comfort and safety, testing your blower motor is a crucial step. By following these guidelines, you'll be well on your way to getting your car's HVAC system back to its original, toasty (or cool) functionality. Happy diagnosing!

AD