how to tell if a screw in fuse is blown

How to Tell if a Screw-in Fuse is Blown

By Kevin Rodriguez
AD

If you're experiencing electrical issues at home, like flickering lights or non-functional appliances, you might be dealing with a blown fuse. A blown fuse in a screw-in fuse is not always immediately obvious, as they don't always show signs of burning or melting. However, there are several ways to tell if a screw-in fuse has surpassed its safety limit.

Before we dive into the methods, ensure you follow safety precautions: turn off the main power supply from your fuse box, use appropriate tools, and never force a fuse that doesn't want to go in or come out. Now, let's explore how to identify a blown screw-in fuse.

Visual Inspection

Screw-in fuses, also known as re-wirable or cartridge fuses, can be inspected visually. However, not all signs of a blown fuse are immediately apparent. Let's look at what to check.

AD
Troubleshooting Dead Outlets and What to Do When GFCI Won’t Reset
Troubleshooting Dead Outlets and What to Do When GFCI Won’t Reset
How to Tell If Your Fuse Is Blown and How Do To Fix It - Today's Homeowner
How to Tell If Your Fuse Is Blown and How Do To Fix It - Today's Homeowner
How to fix a Blown Fuse
How to fix a Blown Fuse

Blown fuses may have:

  • A broken or melted wire element inside the fuse, visible through the transparent fuse body.
  • Blackening or discoloration on the inside of the fuse due to the heat generated from overcurrent.
  • A plastic casing that's cracked, bulging, or discolored, indicating excessive heat build-up.

Using a Multimeter

If the fuse doesn't exhibit any visible signs of being blown, you can use a multimeter to test it. Turn the multimeter to the lowest ohms setting (usually ≤1 ohm), touch both probes to the terminals at each end of the fuse, and check the reading.

My Fuses are Blowing! Should I get a new Electrical Panel?
My Fuses are Blowing! Should I get a new Electrical Panel?
the text reads a visual guide to fusses and how they work
the text reads a visual guide to fusses and how they work

A blown fuse will register a high resistance or infinite resistance (OL, indicating 'open loop' or 'overload'). If the fuse is good, it should show a low resistance reading, close to 0 ohms.

Testing with a Simple Circuit

Another way to test a fuse, especially if you don't have a multimeter, is to create a simple circuit. Connect the fuse in series with another working fuse and a light bulb. If the light bulb doesn't glow, the fuse in question is likely blown.

AD

Alternatively, use a continuity tester (which looks like a small multimeter). Connect the probes to the fuse terminals; in a good fuse, the tester will beep. If it doesn't, the fuse may be blown.

Understanding Fuse Ratings

To ensure you're using the right fuse, it's crucial to understand its ratings. A screw-in fuse typically has two ratings: amps ( Size, e.g., 13A, 16A, etc.) and Volts.

Choosing the correct fuse size is essential. A smaller fuse may blow frequently, even when the circuit is operating normally, while a larger fuse won't protect the circuit from excess current and could lead to overheating or fire in the event of an overload.

AD

Common Causes of Blown Screw-in Fuses

Fuses blow to protect your electrical system from damage caused by excessive current. Here are some common reasons for blown screw-in fuses:

  • Overloaded circuit: Too many appliances or devices drawing more current than the fuse can handle.
  • Short circuit: A faulty appliance or wire touching a live wire, causing a sudden, high surge of current.
  • Worn-out or faulty appliance: Over time, devices can deteriorate and cause electrical malfunctions that lead to blown fuses.

If you've identified a blown screw-in fuse and taken steps to prevent repeats, always replace it with a new fuse of the same rating to maintain your electrical system's safety. Regular inspection and maintenance of your electrical system can help prevent future fuse blow-outs. Stay safe out there!

AD