how to take the head off a ryobi weed eater

Tips to Remove Head from Ryobi Weed Eater

By Matthew Wilson
AD

Ever found yourself in the middle of trimming your lawn, only to have your trusty Ryobi weed eater sputter and stall? Before you throw in the towel and call it a day, know that there's a quick fix you might be able to tackle on your own. Today, we're going to guide you through a simple, yet crucial task: how to take the head off a Ryobi weed eater for a quick cleanup or maintenance check.

But first, why would you want to remove the head in the first place? The most common reason is to clear or replace the nylon cutting line, or string, as it's sometimes called. Over time, this line can get jammed with grass clippings and other debris, affecting the performance of your weed eater. So, let's dive in and learn how to tackle this task.

The Basics: Understanding Your Ryobi Weed Eater

Before we start, it's important to understand the basic structure of your Ryobi weed eater. The head, housing the cutting line, is held in place by a small button or tab. This design allows for easy removal and replacement when necessary.

AD
How to Remove and Replace Ryobi Bump Knob, Ryobi Trimmer String Replacement.
How to Remove and Replace Ryobi Bump Knob, Ryobi Trimmer String Replacement.
How to change the trimmer line on a 40 volt Ryobi edger / weed eater / weed wacker
How to change the trimmer line on a 40 volt Ryobi edger / weed eater / weed wacker
How to Replace a RYOBI 18v and 40v Trimmer Head
How to Replace a RYOBI 18v and 40v Trimmer Head

Safety first! Before you proceed, make sure to unplug your weed eater from any power source. The last thing you want is an errant spark setting off a surprise lawn party.

.locating and Releasing the Head

Most Ryobi weed eaters have a small tab or button located on the side of the head housing. You'll need to press this to release the head. On some models, you might need to use a small flathead screwdriver to press down on the button.

ryobi weed wacker repair, string trimmer, wont start SIMPLE FIX
ryobi weed wacker repair, string trimmer, wont start SIMPLE FIX
How To Remove Ryobi Trimmer Head (2022) | Pad Outdoor
How To Remove Ryobi Trimmer Head (2022) | Pad Outdoor

Once the tab is pressed, you should hear a click. This indicates that the head is now unlocked and ready to be removed. Using both hands, gently turn the head counterclockwise to release it from the tool's body.

Removing the Cutting Line

With the head removed, you should now see the cutting line spool. To remove the line, start by pulling it out from the top of the spool. You may need to use a pair of pliers for a firm grip, as the line can be slippery.

AD

Once you've pulled out enough line to get a good hold, continue pulling until all the line is removed from the spool. If the line is jammed or binds, you may need to use a small pair of scissors or wire cutters to snip it off. Be sure to wear safety glasses to protect your eyes from any flying debris.

Cleaning and Maintaining the Head and Line

Now that the head and line are removed, it's a good time to give them a thorough cleaning. Use a soft brush and some soapy water to clean off any grass clippings or debris. Be sure to rinse the head and line thoroughly and allow them to dry completely before reassembly.

While the head and line are drying, take a moment to inspect them for any signs of wear or damage. If the line shows signs of excessive fraying or wear, it's a good idea to replace it with a new one. Ryobi sells replacement line in various sizes and types to suit your needs.

AD

Replacing the Cutting Line

To replace the cutting line, start by examine the end of the line. You should see a small, rounded black ball or a bulkier, disc-shaped end. This is called the line end and it helps prevent the line from feeding out too quickly.

Next, thread the line through the small hole in the spool and pull it through until you have enough line to reach the other end of the spool. Once you have enough line to work with, insert the line end back into the hole. This time, press down firmly to ensure it locks into place.

Reassembling Your Ryobi Weed Eater

Now that the line is replaced and the head is clean, it's time to put everything back together. Start by aligning the head with the tool's body. You should feel it snap into place as you turn it clockwise.

AD

Once the head is secure, give the line a gentle tug to ensure it's feeding freely. If it doesn't feed, you may have to adjust the tension knob or clutch to release the line. Always follow the manufacturer's instructions for your specific model.

And there you have it! With a little know-how and some elbow grease, you've successfully taken the head off your Ryobi weed eater and performed some much-needed maintenance. Next time you're out tackling those unruly weeds, you'll be ready to tame them with ease. Happy trimming!

AD