How to Remove Ring Doorbell Easily
Are you the proud owner of a Ring doorbell and have you found yourself in a situation where you need to remove it? Perhaps you're moving out, or maybe you want to upgrade to a newer model. Whatever the reason, this guide will walk you through the process of how to take your Ring doorbell off, step by step. Let's dive right in.
Before we start, it's crucial to turned off the unit and remove the faceplate to avoid any accidents. Furthermore, wear safety gloves to protect your hands from any sharp edges or screws.
Preparation and Powering Down
Your first step is to power down your Ring doorbell. If you have a Ring Pro or Elite, you'll need to unscrew the faceplate. For other models, you might need to remove the entire unit. We'll discuss this under the sub-topics below.
Always ensure that the doorbell is not connected to any power source during the removal process to prevent electric shocks.
Ring Pro and Elite
To power down your Ring Pro or Elite, you need to unscrew the faceplate. Use a screwdriver to remove the two screws securing the faceplate to the doorbell. Carefully pull the faceplate off, and the unit should now be powered off.
For other models, the next sub-topic will guide you through the removal process.
Other Ring Doorbell Models
If you have a Ring Video Doorbell (2020 release or earlier), you'll need to removed the entire unit. Start by pressing and holding the faceplate release button for about 10 seconds until the chime button pops out. Then, pull the entire unit away from the mounting bracket.
With the unit removed, you're ready for the next step.
Removing the Mounting Bracket
Now that your Ring doorbell is powered off, it's time to remove it from the wall. As before, the process will differ slightly depending on your model.
The goal is to leave the mounting bracket behind, which will help make installing your new doorbell easier.
Ring Pro and Elite
For other models, refer to the next sub-topic.
Other Ring Doorbell Models
For these models, you'll need to remove the screws securing the mounting bracket to the wall and then pull the bracket away. You might need to gently wiggle the bracket to loosen it from the wall.
If you find that the screws are too tight, you can try using a drill to carefully remove them.
With the mounting bracket removed, you've successfully taken your Ring doorbell off. However, before you put your old doorbell away or install a new one, take a moment to clean the area where the doorbell was mounted. This will ensure that the surface is ready for your new device.
Remember, if you're installing a new Ring doorbell, always make sure to update its firmware and register it to your Ring account to ensure optimal performance.
Congratulations on successfully removing your Ring doorbell! Whether you're moving on to a new device or just need to take it apart for repairs, this guide has hopefully made the process a breeze. Now, look ahead to your next smart home upgrade or maintenance task, and happy doorbell tinkering!