How to Change a Brita Filter: A Step-by-Step Guide
Brita filters are a popular choice for those looking to improve their water quality. With regular use, however, they can become clogged or lose their effectiveness. Learning how to take out a Brita filter is the first step towards maintaining or replacing it.
Removing a Brita filter is a straightforward process that requires minimal tools. Regular maintenance ensures your filter works efficiently and helps prolong its lifespan. In this guide, we'll walk you through the simple steps of replacing your Brita filter.
Preparation and Safety Measures
Before starting, ensure you have all the necessary supplies. Apart from your new Brita filter, you'll need a Phillips #2 screwdriver, your Brita pitcher, and a clean surface to work on.
Remember, the filter can be quite porous, and it's normal to see some water residue. To maintain safety and hygiene, always handle the filter gently and avoid touching the filter media with your bare hands.
Determining Which Filter to Use
Brita offers several types of filters, including Standard, Longlast, and Advanced. Each has different recommendation timelines, so check your Brita pitcher for specific instructions. In general, replace Standard and Longlast filters every 40 gallons or 2 months, while Advanced filters should be replaced every 120 gallons or 6 months.
If unsure, check the indicator on your pitcher; it should change color to alert you it's time for a replacement.
Removing the Old Filter
Start by disconnecting your Brita pitcher from the water supply, if applicable. Then, lift the locking tab on the handle to unlock the reservoir. Finally, firmly pull the reservoir away from the base to expose the filter.
Grip the filter from the sides rather than the top or bottom to avoid damaging the filter media. Twist and pull gently to remove the filter from the filter compartment. Be prepared for some water to escape as the seal is broken.
Installing the New Brita Filter
Once you've removed the old filter, it's time to install the new one. Begin by ensuring the new filter is completely dry, as pre-moistening the filter can lead to reduced performance.
The new filter will come with a protective wrap. Remove this wrap and discard it. Inspect your new filter to ensure there's no damage to the filter media or housing.
Aligning the New Filter
Before inserting the new filter, ensure it's correctly aligned with the filter compartment. The notch on the filter should match the indentation in the compartment to ensure a secure fit.
Start with the bottom of the filter and gently guide it into the compartment. Apply steady pressure to insert the filter. You should hear a click when it's fully engaged. If you encounter resistance, check that the filter is aligned correctly and try again.
Reassembling Your Brita Pitcher
Once the filter is secured, reattach the reservoir to the base, ensuring it's a tight fit. Then, reattach the locking tab on the handle to secure the reservoir in place.
Finally, run a few replacement cycles without adding or removing water to fully saturate your new filter. This removes any loose carbon particles that could otherwise end up in your water. Your Brita pitcher should now be ready for efficient use.
Regularly replacing your Brita filter ensures optimal water quality and filter performance. Make a habit of checking your filter every two months, or as recommended by Brita, to ensure you're always drinking fresh, filtered water. Happy filtering!