how to take iphone apart

Mastering iPhone Disassembly: A Step-by-Step Guide

By Richard Davis
AD

Ever wondered how to take apart your iPhone to repair or upgrade it? With the right tools and knowledge, it's quite feasible. Let's guide you through this process, focusing on iPhone models from 8 to the latest 13. Remember, doing this voids your warranty and requires careful precision. Let's dive in!

Before you start, ensure you have the necessary tools: a pentalobe screwdriver, tweezers, a suction cup, a plastic opening tool, and some patience. It's also crucial to ground yourself to prevent static discharge, which could damage your iPhone's components.

Preparation and Initial Steps

First, back up your iPhone data to iCloud or your computer using iTunes. Power off your iPhone, then use the pentalobe screwdriver to remove the two screws at the bottom. Be careful not to lose these screws.

AD
iPhone 6 Take Apart Repair Guide - RepairsUniverse
iPhone 6 Take Apart Repair Guide - RepairsUniverse
Here's how Apple made the iPhone SE so cheap
Here's how Apple made the iPhone SE so cheap
iPhone 5S Take Apart Repair Guide
iPhone 5S Take Apart Repair Guide

The next step involves prying open your iPhone. Insert the plastic opening tool into the small gap at the bottom of your iPhone and slide it along the edge to break the adhesive seal. Use the suction cup to lift the screen slightly, then insert the opening tool to break the adhesive around the entire screen.

Removing the Screen

With the adhesive broken, use the opening tool to pry up the screen assembly, disconnect the cables, and remove it. Be delicate as the cables are fragile. To detach the cables, use the iOpener (a heated tool) to soften the adhesive, then carefully peel off the cables.

Fixing a cellphone with a lighter
Fixing a cellphone with a lighter
From Apple to Android, these framed disassembled smartphones make for a worthy designer gift!
From Apple to Android, these framed disassembled smartphones make for a worthy designer gift!

Now, let's disconnect the Touch ID cable. Use tweezers to gently pull the connector up. The cable is now free. The next step is to remove the display frame. Use the opening tool to pry up the clips on the sides and bottom, then the top. Lift the frame carefully to free it from the adhesive.

Accessing Internal Components

With the screen and frame removed, you'll expose the iPhone's internal components. These include the battery, speakers, logic board, and cameras. Each of these has its own set of connectors and screws.

AD

For instance, to remove the battery, first, remove the single screw securing it. Then, use iOpener to soften the adhesive, carefully peel off the battery, and disconnect its connectors. Similarly, remove other components following their specified steps.

Reassembly and Final Steps

Reassembly is the reverse of disassembly. Remember to realign the screen and secure it with the clips. Also, reattach the Touch ID cable and secure it. Check all connections and screws.

Once everything is back in place, seal the edges with new adhesive and gently press together. Power on your iPhone. If everything is okay, you've successfully taken apart and reassembled your iPhone!

AD

Now that you've mastered the process, consider exploring upgrades like replacing the battery, Storage, or even trying a new model. Happy tinkering!

AD