how to take apart the dyson vacuum for cleaning

"Dyson Vacuum Disassembly: Step-by-Step Guide for hassle-free Cleaning

By Jessica Thomas
AD

Introducing your Dyson vacuum to a thorough cleaning routine can extend its life and maintain its performance. However, its complex design can be daunting to disassemble. Fret not, as we have compiled a comprehensive guide on how to take apart and meticulously clean your Dyson vacuum.

Before you start, gather your tools: a screwdriver (usually Philip's-head for Dyson models), a cleaning brush, isopropyl alcohol, cotton swabs, and a soft cloth. Unplug your vacuum and ensure it's cool to prevent any accidental burns.

Dismantling Your Dyson Vacuum

depende on the model of your Dyson vacuum, the disassembly process may vary slightly. We'll focus on the most common models, such as the Dyson Ball Animal 2 and Dyson Cinetic Big Ball.

AD
How to Take apart a Dyson vacuum to clean it!
How to Take apart a Dyson vacuum to clean it!
several different types of engine parts sitting on a table with the words dysson v6 disassembly and cleaning
several different types of engine parts sitting on a table with the words dysson v6 disassembly and cleaning
How to Take Apart a Dyson Vacuum Cleaner: A Step-by-Step Guide
How to Take Apart a Dyson Vacuum Cleaner: A Step-by-Step Guide

The primary goal is to remove the cyclones, which are the cylindrical parts where dirt and dust are separated from the airflow.

Removing the Cyclones

Begin by removing the clear bin at the top. For Dyson Ball models, locate and press the red button on the side to release it. For the Dyson Cinetic, the bin lifts off directly.

Vacuum repair man shows how to take apart and reassemble Dyson V11 for cleaning
Vacuum repair man shows how to take apart and reassemble Dyson V11 for cleaning
Vacuum repair man shows how to take apart and reassemble Dyson V11 for cleaning
Vacuum repair man shows how to take apart and reassemble Dyson V11 for cleaning

Next, locate the cyclones. They're usually at the back of the machine. For Dyson Ball models, you'll have to remove the entire ball unit to gain access to the cyclones. For Dyson Cinetic, the cyclones are accessible from the back.

Disconnecting the Hose

Before removing the cyclones, disconnect the hose from the vacuum. This ensures that no dirt or debris is spilled while cleaning.

AD

The hose is typically connected to the machine via a latch or a clip. Firmly press the latch or lift the clip, and gently pull the hose away from the vacuum.

Cleaning the Vacuum Parts

Once you've successfully disassembled your Dyson vacuum, it's time to clean each part meticulously.

Before cleaning, ensure that each part is disassembled correctly and no dirt is trapped within the parts. Inspect any filters and clean them according to the manufacturer's instructions.

AD

Cleaning the Cyclones

The cyclones are one of the dirtiest parts of your Dyson vacuum. To clean them, first, remove any visible dirt or debris using a cleaning brush. For tougher dirt, you can use isopropyl alcohol on a cotton swab.

Be sure to clean both the inside and outside of the cyclones. Dirt can build up in the grooves and openings, so ensure these areas are meticulously cleaned as well.

Cleaning the Filters

Dyson vacuums come with different types of filters - some are washable, while others are not. Always refer to your user manual for filter-specific cleaning instructions.

AD

If your filter is washable, gently tap it against a hard surface to dislodge any dust. Then, wash it under lukewarm water, making sure to rinse out all the soap. Allow it to air dry completely before reassembling your vacuum. Remember, a wet or damp filter can compromise your vacuum's performance.

Now that you've thoroughly cleaned each part, reassemble your Dyson vacuum. Ensure that each component is properly aligned and secured before switching it back on. Regular cleaning of your Dyson vacuum will not only extend its life but also keep your home spotlessly clean.

Before storing your vacuum, make sure it's completely dry. Moisture can lead to mold and bacterial growth, which can harm both you and your vacuum. Always store in a cool, dry place for optimal performance and longevity.

AD