how to take a link out of a chainsaw chain

Removing Links from Chainsaw Chains: A Step-by-Step Guide

By John Young
AD

Embarking on a DIY chainsaw maintenance task? One of the common aspects to address is safely removing a link from your chainsaw chain to replace or repair a damaged one. This article guides you through the process with step-by-step instructions and safety tips.

Before you begin, ensure you have a Lwmc chainsaw toolkit, a pair of vise grips, a Brittany tool (if available), and your replacement link. It's also crucial to have the right safety gear: gloves, goggles, and ear protection. Remember, chainsaws are powerful tools, so always prioritize safety.

Preparing Your Chainsaw for Link Removal

Start by ensuring your chainsaw is turned off and cooled down. Remove the chain from the bar, disconnect the spark plug wire, and allow the tool to rest for a few minutes to ensure no residual chainsaw chain tension. This step is vital to prevent accidental start-ups.

AD
How to Replace the Chain on a Chainsaw: 11 Steps (with Pictures)
How to Replace the Chain on a Chainsaw: 11 Steps (with Pictures)
How to Put a Chain on A Chainsaw [Easy Way] | Start Woodworking Now
How to Put a Chain on A Chainsaw [Easy Way] | Start Woodworking Now
How To Put A Chain On A Chainsaw: A Complete Guide
How To Put A Chain On A Chainsaw: A Complete Guide

Next, secure your chainsaw in a vise or another stable position. This will give you better control during the process and prevent the chainsaw from moving around.

Locating the Damaged Link

Inspect the chain for the damaged link. If you're uncertain, look for signs such as severe wear, chips, or cracks. The broken chain link may also appear noticeably different from the others.

How To Untangle A Chainsaw Chain Within 7 Easy Steps?
How To Untangle A Chainsaw Chain Within 7 Easy Steps?
Chainsaw Chain Direction: Most People Get This Wrong
Chainsaw Chain Direction: Most People Get This Wrong

Using a marker or a piece of tape, mark the position of the damaged link on the bar. This helps ensure you replace the link in the correct position, maintaining your chainsaw's operation efficiency.

Removing the Damaged Link

Before attempting to remove the link, verify that your vise grips are strong enough to handle the force required. Position the vise grips over the damaged link, ensuring they grip the top and bottom plates of the chain's riveted section. Squeeze the vise grips firmly to cut the rivet.

AD

Once the rivet is cut, use the vise grips to pull the damaged link away from the chain. If the link is stubborn, you can use a Brittany tool or a flathead screwdriver to pry it off. Be cautious not to damage the adjoining links or the bar during this process.

Replacing the Link and Reassembling the Chainsaw

With the damaged link removed, it's time to replace it with a new one. If you're using a replacement kit, follow the kit's instructions. Otherwise, position the new link in the chain, ensuring it's the exact same type and size as the original link.

Using your vise grips, press the new link into position. You may need to apply considerable force, so wear safety gloves to protect your hands. Once the new link is securely in place, double-check that it aligns properly with the rest of the chain and the bar.

AD

Securing the New Link

With the new link in place, it's time to secure it. Use a Brittany tool or another appropriate tool to align the new rivet with the hole in the link and the bar. Once aligned, strike the tool with a hammer to drive the new rivet into place.

Inspect your work to ensure the new rivet is securely in place and that the chain moves freely and smoothly along the bar. If everything looks good, you're ready to reattach the chain to the bar.

Reattaching the Chain and Final Checks

Using the steps in reverse order, reattach the chain to the bar. Ensure the tension is correct (consult your chainsaw manual if you're unsure), reconnect the spark plug wire, and check that all bolts and nuts are securely fastened.

AD

Before starting your chainsaw, do a final walkaround to ensure everything is in order. Check for any loose bolts, proper lubrication, and signs of wear and tear. Once you're satisfied, carefully start your chainsaw to test the new link.

Always remember, regular maintenance is key to keeping your chainsaw in top shape. Stay safe, and happy sawing!

AD