how to switch outlets

Step-by-Step: How to Switch Outlets Like a Pro

By Thomas Jackson
AD

Switching electrical outlets might seem like a daunting task, but it's a crucial skill to learn for home maintenance and safety. This guide will walk you through the process, from understanding the different types of outlets to the step-by-step procedure of replacing them.

Before we dive in, remember that safety is paramount when working with electricity. Always ensure the power is turned off at the circuit breaker, and use a non-contact voltage tester to double-check that there's no power running to the outlet.

Gathering Your Tools and Understanding Outlet Types

To switch outlets, you'll need a few essential tools:

AD
an empty room with the words how to add an outlet in 50 seconds on it
an empty room with the words how to add an outlet in 50 seconds on it
Home
Home
How to Wire a Light Switch and Outlet Combo | 6 Easy Ways (2026)
How to Wire a Light Switch and Outlet Combo | 6 Easy Ways (2026)
  • Non-contact voltage tester
  • Flathead screwdriver
  • Needle-nose pliers
  • Outlet (decora-style outlets are common and easy to find)
  • Wire stripper

Outlets come in several types, including standard 15-amp outlets (like the one in most homes), 20-amp GFCI outlets (used in kitchens and bathrooms), and tamper-resistant outlets, which are required in new homes. While the process is similar for all types, some slight differences may apply.

For this guide, we'll focus on the standard 15-amp outlet. Let's get started!

How to Wire an Outlet Off a Switch (7 Steps)
How to Wire an Outlet Off a Switch (7 Steps)
How to Update Light Switches and Outlets for a Contemporary Look
How to Update Light Switches and Outlets for a Contemporary Look

Replacing a Standard 15-Amp Outlet

With your tools ready and the power turned off, follow these steps to replace your outlet:

  1. Remove the existing outlet cover plate using your screwdriver.
  2. Use your voltage tester to ensure the wires are not hot. Then, unscrew the outlet from the electrical box.
  3. Take note of how the wires are connected - this will help you replicate the setup in your new outlet.
  4. Strip about 3/4 of an inch of insulation from the end of each wire using your wire stripper.
  5. Connect the bare copper wire (ground) to the green screw on the new outlet. Tighten it securely.
  6. Connect the white wire (neutral) to the silver screw on the new outlet. Again, tighten it securely.
  7. Connect the black wire (hot) to the brass screw. Ensure the outlet's internal sides match the color-coding of your wires.
  8. Gently bend the wires back into the electrical box, ensuring they're not preventing the outlet from sitting flat against the wall.
  9. Secure the outlet to the electrical box using the provided screws.
  10. Reattach the cover plate using your screwdriver.
  11. Turn the power back on at the circuit breaker and test your new outlet.

Installing a New Outlet in an Existing Box

If you're adding a new outlet, the process is similar but requires an empty electrical box. You may need to fish new wires through the walls, which involves running wires through existing holes and connecting them securely to the new outlet.

AD

It's crucial to note that if your home is older, it might have aluminum wiring, which requires a different approach. Always consult a licensed electrician when dealing with aluminum wiring.

Replacing GFCI and Tamper-Resistant Outlets

GFCI and tamper-resistant outlets have additional safety features, so there are slight differences in installation:

GFCI Outlets

GFCI outlets have a 'load' and 'line' side, indicated by the screws. The line side goes to the power source, while the load side powers other devices. Connect the wires to the screws in the same manner as a standard outlet, but ensure the bare copper wire goes to the green 'load' screw.

AD

After securing the outlet, press the 'test' button. The 'reset' button should pop out. Now, try using a lamp plugged into the outlet. The lamp should turn off when you press the 'test' button. If it does, press 'reset,' and your lamp should work again.

Tamper-Resistant Outlets

Tamper-resistant outlets have slats that close the outlet slots when no plug is inserted, making them safe for homes with children. The installation process is the same as a standard outlet, but you might need to use a special tamper-resistant cover plate.

Congratulations! You've successfully learned how to switch outlets. Remember, safety should always be your top priority. If you encounter any issues or concerns, don't hesitate to consult a professional electrician.

AD

Now that you've mastered this essential skill, you can keep your home's electrical system up-to-date and safe. So go ahead, grab those tools, and start upgrading your home's outlets today!

AD