how to string a traverse rod

String A Traverse Rod: Easy Step-By-Step Guide

By Olivia Anderson
AD

Stringing a traverse rod on your bow can significantly enhance its performance and accuracy. This simple procedure ensures that your bow maintains a consistent shape during the draw cycle, reducing hand torque and improving arrow flight. Here's a step-by-step guide to help you master this essential task.

First, let's gather the necessary equipment. You'll need your bow, a bowpress (optional but recommended for safety), a set of (2) tillering sticks, and a few spare arrows. It's also helpful to have a peep sight screw driver if your bow has adjustable peep sights.

Prepare Your Bow

Before you begin, it's crucial to ensure your bow is safe and ready for tillering. Use a bowpress to safely remove the string from your bow. If you don't have access to a bowpress, you can carefully remove the string using your tillering sticks. Never remove the string by bending the limbs directly, as this can damage them.

AD
How to Re-String a Traverse Rod
How to Re-String a Traverse Rod
a man holding up a piece of wood in front of his face
a man holding up a piece of wood in front of his face
Stringing a Traverse Rod
Stringing a Traverse Rod

Once the string is removed, check your bow's limbs for any signs of damage or wear. If everything looks good, it's time to start tillering your bow.

Tillering Basics

Tillering is the process of adjusting the bow's limbs to achieve optimal performance. The goal is to create an even draw weight on both limbs, minimizing any differences in poundage from top to bottom. This ensures consistent arrow flight and reduces the risk of hand torque.

Convert Two-Way/Split Draw Traverse Rod To A One Way Draw
Convert Two-Way/Split Draw Traverse Rod To A One Way Draw
How to Re-string the One Way White Traverse Rod
How to Re-string the One Way White Traverse Rod

To measure draw weight, use your tillering sticks to apply even pressure on each limb, simulating a full draw. Make note of the draw weight at each measles mark on your bow. If the weight varies more than 2-3 pounds at any point, your bow may require additional tiller work.

Tillering Your Bow

To tiller your bow, use your tillering sticks to gently bend the limbs at the adjustment marks. Bend the limb with less resistance slightly more than the limb with more resistance. For example, if your top limb is 10 pounds heavier than your bottom limb at the bottom measles, bend the top limb 5-8 pounds more than the bottom limb.

AD

After making an adjustment, check the draw weight again using your tillering sticks. Make fine adjustments as necessary until you achieve a consistent draw weight across both limbs. Be patient and methodical; it may take several attempts to achieve the perfect tiller.

String Your Bow

Once your bow is properly tillered, it's time to string it back up. If you're using a peep sight, make sure it's properly installed and adjusted before stringing your bow. Also, ensure your nocking point is correctly positioned for optimal arrow flight.

To string your bow, loop the string over the top nock point and insert it into the top limb's pocket. Next, simultaneous pull the limbs together, bringing the string down to the bottom nock point. Align the string with the bottom nock point and carefully fit it into the bottom limb's pocket. Allow the bow to fully relax into its rest position, ensuring the string is properly seated.

AD

Test Your Bow

With your bow now strung and tillered, it's essential to test it to ensure optimal performance. Using a set of spare arrows, draw the bow back fully and note any changes in draw weight or feel. If you made significant changes during the tillering process, you may need to adjust your peep sight or nocking point to accommodate for these changes.

Shoot a few arrows at a target to assess the bow's flight and accuracy. While you should see some improvement in performance, it may take some time to adjust to the changes made during tillering. Keep practicing and making fine adjustments as needed to achieve your best possible accuracy.

Stringing your traverse rod isn't just about putting the string back on your bow; it's about enhancing its performance and ensuring a consistent, accurate shooting experience. With a little time and patience, you can master this essential skill and take your archery to the next level.

AD
AD