how to string a kendama

Mastering Kendama: Easy Steps to String Like a Pro

By Daniel White
AD

Experience the captivating art of Kendama, the Japanese skill toy that's been delighting enthusiasts for centuries. If you're new to this fascinating world, you might be wondering, "How do I string a Kendama?" Don't worry, we've got you covered. In this comprehensive guide, we'll walk you through the process step by step, ensuring you'll be well on your way to mastering this traditional pastime.

The Kendama offers a myriad of tricks and challenges, but before you can start practicing, you need to string it correctly. Let's dive into the process of stringing a Kendama and unlock the secrets of this ancient toy.

Understanding Your Kendama

Before you begin, it's crucial to understand the components of your Kendama. A traditional Kendama consists of a ken (the handle) and a dama (the ball). The ken has a small hole at one end where the string is attached, and the dama has a small cup at the top, a trough on one side, and a spike at the bottom.

AD
two hands are holding a piece of wood and threading it to the end of a wooden object
two hands are holding a piece of wood and threading it to the end of a wooden object
a man sitting in front of a table holding an object with wires attached to it
a man sitting in front of a table holding an object with wires attached to it
Kendama USA - Trick Tutorial - Intermediate - Flying V
Kendama USA - Trick Tutorial - Intermediate - Flying V

Most Kendamas come with a string pre-attached, but over time, strings can fray or break, requiring replacement. Don't worry, restringing a Kendama is a straightforward process, and we'll guide you through it.

Materials Needed

To restring your Kendama, you'll need just a few materials:

String Tricks #1 けん玉
String Tricks #1 けん玉
Kendama USA - Trick Tutorial - Advanced - Stilt
Kendama USA - Trick Tutorial - Advanced - Stilt
  1. New string
  2. The old string (if present)
  3. Scissors
  4. Tape (optional, for added tension)

Preparing the Ken

Start by removing the old string, if applicable. You can do this by carefully untying the knot and pulling it through the hole in the ken. If the string is broken or frayed beyond use, you can cut it and pull the remaining piece through the hole.

Once the old string is removed, you should have a clean ken hole ready for the new string. Ensure the hole is clear of any debris, as this could interfere with stringing your Kendama.

AD

Stringing the Kendama

Now that you've prepared the ken, it's time to string the Kendama. We'll use a simple overhand knot for this process, as it's easy to tie and untie when necessary.

The length of the string is crucial for optimal play. Traditionally, the string is about 30 inches (76.2 cm) long, with about 20 inches (50.8 cm) of that being the free string. However, this can vary based on personal preference and playstyle. We recommend starting with a standard 30-inch string and adjusting as needed.

Tying the Knot

Cut your new string to the desired length, plus a few extra inches for tying and knotting. Take the string and insert it through the hole in the ken, pulling about an inch of string through the hole. This will be your tether, connecting the ken and the ball.

AD

Tie an overhand knot in the string, leaving enough room for the kendama saucer (the cup at the top of the ball) to fit between the ken and the knot. Be sure to leave enough string after the knot to connect the tama and the ken. This is typically around 20 inches (50.8 cm).

Securing the Saucer

Once your knot is tied and your tether is secure, it's time to thread the string through the kendama saucer. The saucer should rest comfortably between the ken and the knot, sitting flush with the ken.

Pull the rest of the string through the saucer, creating a loop that will wrap around the spike of the tama when connected. Ensure there's enough string on both sides of the saucer to create a tight connection once the tama is attached.

AD

Connecting the Tama

Now that your ken is prepared, it's time to attach the tama. Holding the ken and the string in one hand, grab the tama with the other. Line up the spike at the bottom of the tama with the loop you've created in the string.

The loop should sit loosely around the spike, with plenty of room to pull the tama apart from the ken for play. If the loop is too tight, you may need to release some of the tension in the knot, or add some relief holes to the tama using a fraying needle or a drill (ensure the holes are small and well-sanded for comfort and safety).

Adjusting the Tension

Once the tama is connected, you may need to adjust the tension of the string. To increase tension, pull the free string taut and tie a half hitch around the tether near the ken. This will tighten the string and make the connection between the tama and ken more secure.

If you prefer, you can use a small piece of tape wrapped around the tether near the ken to increase tension. This method allows for easier adjustments and is less likely to cause wear on the string over time.

Conclusion

Congratulations! You've successfully strung your Kendama and are now ready to explore the captivating world of Kendama tricks and techniques. Remember, the key to a well-strung Kendama is a comfortable, secure connection between the ken and the tama, allowing for smooth and responsive play.

Whether you're a seasoned Kendama practitioner or just starting your journey, mastering the art of restringing your Kendama is an essential skill. Now that you know the process, you'll be well equipped to maintain and care for your Kendama, ensuring it delivers countless hours of enjoyment and challenge.

As you delve into the fascinating world of Kendama, we encourage you to explore the rich history, traditions, and community surrounding this ancient skill toy. Happy playing, and remember, every touch, every trick, is a step towards mastery.

AD