how to strap two amps together

Combine Amp Power: How to Strap Two Amps Together

By Daniel Martin
AD

Ever stumbled upon a gig where your trusty amp just couldn't cut it with the bass? You're not alone. If you've found yourself in this situation, it's high time you considered strapping two amps together. This practice, known as 'amping up', can give you that extra oomph without breaking the bank. So, let's dive into the world of stereo sound and explore how to strap two amps together like a pro.

First, let's address the why. Connecting two amps can significantly increase your output, providing a fuller, more robust sound for your guitar. Furthermore, you can enjoy the benefits of stereo separation, panning effects, and even use one amp for rhythm and the other for lead. Now, let's roll up our sleeves and get to work.

Understanding Your Amps: Single-ended and Solid-state vs. Tube

Before you startfigured82248;, it's crucial to understand the type of amps you're working with. There are mainly two types of amps: single-ended (class A) and solid-state (class AB).

AD
DIY guitar amp hacks
DIY guitar amp hacks
Two Fuse Blocks, Multiple Amps and DSP? How to Wire COMPLEX Amplifier Rack!
Two Fuse Blocks, Multiple Amps and DSP? How to Wire COMPLEX Amplifier Rack!
Hack Any Radio Into a Guitar Amp V2
Hack Any Radio Into a Guitar Amp V2

Tube amps are class A, which means they produce half power and full power at the same efficiency. This results in a warm, rich tone. On the other hand, solid-state amps like Fender amps are class AB, providing higher clean headroom and better handling of pedals.

Single-ended Amps

Single-ended amps, like the classic 1959 Fender Bassman, are ideal for strapping together due to their high impedance and low current draw. They can be easily driven by a single preamp tube.

two amps are sitting next to each other
two amps are sitting next to each other
two orange amps sitting on top of a hard wood floor next to each other
two orange amps sitting on top of a hard wood floor next to each other

However, they have a lower power output and are more susceptible to heat. To strap them together, you'll need to connect two speakers with a corresponding impedance. For instance, two 8-ohm speakers will work well together.

Solid-state Amps

Solid-state amps, such as Fender's Super Champ X2, offer more headroom and are more robust than tube amps. They're usually more straightforward to strap together, thanks to their lower impedance and higher current draw.

AD

However, keep in mind that connecting two 4-ohm solid-state amps can cause issues. The heat generated might be too much for the amp to handle. Always check your amp's power rating and match speakers accordingly.

Strapping Your Amps Together: The Magic Behind the Music

Now that we've established the type of amps you're working with, let's discuss the two most common methods to strap amps together: in-series and in-parallel. Each has its advantages and is suited to different situations.

For instance, connecting two amps in-series is ideal for capturing the full spectrum of your tone. This setup can help prevent speaker overloading and offers more headroom. On the other hand, connecting in-parallel can increase your sound's overall volume and adding extra depth.

AD

Series Connection

Connecting in-series involves hooking up two speakers, so they share a single signal path. This method is excellent for keeping the integrity of your initial gain and reducing potential noise.

To connect in-series, you'll need a 2 to 4 ohm speaker jack, which allows your amp to see the combined impedance of both speakers. This type of connection is often used with base cabinets like the Fender Reverb tanks.

Parallel Connection

Connecting two amps in-parallel involves hooking up the speakers to separate channels. This method can provide more volume and a panoramic stereo effect. However, it might introduce noise and reduce the headroom of your amps.

AD

To connect in-parallel, you'll need two separate speaker jacks or a 2 to 8 ohm speaker jack. This type of setup is perfect for using multiple amp heads, like the classic Marshall JCM900.

One final note, always be conscious of your total wattage. Strapping two amps together increases your potential power output. If you push too hard, you risk blowing a speaker or damaging your amp. So, keep an eye on your volume.

From here, the sky's the limit. Experiment with different setups, and most importantly, have fun! Strapping two amps together is an art form, so don't be afraid to explore, try new things, and find what works best for you. Until next time, happy riffing!

AD