how to start polaris sportsman 570

How to Start Your Polaris Sportsman 570: A Step-by-Step Guide

By Nicole Thomas
AD

A machine, like the Polaris Sportsman 570, is a joy to behold when it hums to life, but knowing how to start it correctly can be a beautiful experience. Let's break down the process into simple, step-by-step instructions to ensure you're operating it safely and efficiently.

Before we dive into the starting process, let's make sure you've prepared your Polaris Sportsman 570. This includes checking the engine oil level, inspecting the tire pressure, and ensuring there's no debris that could interfere with the engine or tracks. Now, let's get your quad running.

Preparing to Start the Polaris Sportsman 570

Before you turn the key, there are a few preliminary steps to ensure a smooth start.

AD
DOWNLOAD Polaris Sportsman Repair Manual 400 450 500 550 600 700 800 850 570
DOWNLOAD Polaris Sportsman Repair Manual 400 450 500 550 600 700 800 850 570
Polaris Sportsman 570
Polaris Sportsman 570
DYI Polaris Sportsman AWD Quick Fix
DYI Polaris Sportsman AWD Quick Fix

Firstly, always ensure your vehicle is on a flat, stable surface. This is crucial for a safe and efficient start. Additionally, make sure no bystanders are nearby, as the engine can suddenly kick in.

Fuel Check

Before you start, check the fuel level. The vehicle's fuel gauge should give you an idea of how much gas is in the tank. If the gauge is low, top it off with high-quality gasoline to avoid any starting issues.

Avoid These Polaris Sportsman Years | Buyer Alert
Avoid These Polaris Sportsman Years | Buyer Alert
2017 Polaris Sportsman 570 First Ride At The Land
2017 Polaris Sportsman 570 First Ride At The Land

Throttle Check

To prevent the engine from racing when you release the kill switch, gently pull out the throttle trigger to the first detent. This should set the engine to idle speed.

Starting the Polaris Sportsman 570

Now that you've done the groundwork, it's time to turn the key and fire up the engine.

AD

Begin by shifting the transmission into 'N' (Neutral) and applying the parking brake. This is essential for safety and to prevent the vehicle from rolling when the engine starts.

Turning On the Ignition

Hold the kill switch in the 'ON' position and turn the ignition key to the 'ON' position. This will allow the fuel pump to prime the engine with gasoline. You should hear a clicking sound from the engine suggesting that the fuel pump is cycling.

Starting the Engine

Next, pull out the clutch lever and turn the ignition key to the 'START' position. The engine should kick in a couple of seconds. If it starts, release the clutch lever gently. If the engine doesn't start, do not persist, but instead wait a few minutes before trying again to avoid flooding the engine.

AD
AD