Revive Your Nissan: Quick Fix for Starting with Dead Key Fob
Ever found yourself in a predicament where you're standing beside your Nissan, staring blankly at your key fob, only to realize the battery's dead? Don't panic. You're not stranded just yet. This guide will walk you through how to start your Nissan when your key fob is out of juice.
First, let's understand that a Nissan key fob uses a simple button cell battery, usually a CR2025 or CR2032. When this battery dies, it stops transmitting the signal to unlock or start your vehicle. But fear not, your Nissan hasn't entirely locked you out. It's designed with redundancies to ensure you can still access and start your car.
Using the Manual Key
The first and most straightforward method to start your Nissan when your key fob is dead is by using the manual key tucked inside your fob. Most people overlook this, but it's a tried-and-true method that's been around since the days before key fobs.
To use your manual key, follow these steps:
1. Unlock the Driver's Door
Begin by inserting the manual key into the keyhole on the driver's side door. Turn the key to the left to unlock the door. If your Nissan is an older model, this might be the only key you have, and you can proceed to the next step. If your Nissan has a keyless-go feature, continue to the next subheading.
2. Start the Vehicle with a Keyless-Go Feature
In some Nissans, you might have a keyless-go system that allows you to start the car without inserting the key. To use this feature, once you've unlocked the door, pull the parking brake up and press the brake pedal. Then, press the start/stop button without inserting the key. Your car should start.
If your Nissan doesn't have a keyless-go system, proceed to the next main topic.
Using the Spare Key Fob
If your Nissan came with a set of keys, you might have a spare key fob tucked away somewhere. If you do, this is an easy fix. Just use the spare and replace the battery in the dead one later.
If you can't locate the spare, not all hope is lost. You can still start your car using the following method.
1. Jump-Start the Key Fob
Your key fob might still have enough juice for one last attempt to start your vehicle. To do this, remove the key from the fob and place both the key and the fob close to each other, about an inch apart. The idea is to boost the fading signal from the battery.
Re-insert the key into the driver's door, turn the ignition to the ON position, and then try to press the start/stop button. Your Nissan should start. If not, move on to the next subheading.
2. Use a Wire to Bypass the Fob
In this method, we're going to bypass the key fob completely and use a wire to connect the ignition switch directly to the starter motor. This method requires some basic mechanical skill and understanding of your vehicle's electrical system. If you're not comfortable with this, it's best to seek professional help.
First, locate the ignition switch and the starter motor wire. The ignition switch is usually a large plastic part with a key inserting into it. The starter motor wire is a thick red or brown wire connected to the starter motor. Once you've located them, simply touch the wire to the appropriate terminal on the ignition switch. Your car should start.
And there you have it! A variety of methods to help you start your Nissan when your key fob dies. Always remember to replace the battery in your key fob as soon as possible to avoid being stranded again. Safe driving!