How to Start Your John Deere Snow Blower: A Step-by-Step Guide
Winter's first snowfall often brings a sense of wonder, but it also means it's time to prepare your John Deere snow blower for action. With the right steps, you can ensure a smooth start and a season of efficient snow clearing. Let's delve into how to start your John Deere snow blower safely and effectively.
Before we dive into the starting process, it's crucial to familiarize yourself with your snow blower's location and ensure it's easily accessible. Storing your snow blower in a shed or garage makes prep time much shorter when the snow begins to fall. Also, make sure you have all the necessary safety gear and supplies at hand, including gloves, ear protection, and a scraper for the augers.
Preparation: Readying Your John Deere Snow Blower
Before attempting to start your snow blower, there are several checks to ensure your machine is in top shape and ready for operation.
First, ensure your snow blower is on a flat surface. This will provide stability and make the starting process safer and smoother. Next, check the fuel level. For cold weather starts, it's recommended to use fresh, stabilized gas mixed withFuel Stabilizer to prevent fuel degradation. If your snow blower has been sitting all summer, it's a good idea to drain the old gas and refill with fresh fuel.
Inspecting the Air Filter and Spark Plug
Before every snowfall, it's a good practice to inspect the air filter. A clogged air filter can make starting your snow blower more difficult and impacts its overall performance. If the filter is dirty, clean or replace it as needed.
The spark plug is another critical component to check. A fouled spark plug can prevent your snow blower from starting. Inspect the spark plug, and if necessary, replace it. Always ensure you're using the correct spark plug recommended by John Deere for your specific model.
Checking the Tires, Skid Shoes, and Augers
Inspect the tires for proper inflation and tread wear. Proper tire pressure ensures optimal traction and performance. Also, check the skid shoes - these metal plates beneath the machine bear the weight and protect the auger housing. If they're worn out, you might need to replace them to prevent damage to the auger housing.
Lastly, inspect the augers. These paddles cut through and throw the snow. If they're not in good condition, they can cause issues with snow clearing. If you notice any damage, request a replacement part from a John Deere dealer.
Starting Your John Deere Snow Blower: Step-by-Step
With your John Deere snow blower properly prepped, it's time to start it. Always follow these safety guidelines before starting - ensure the area around you is clear of people and objects, and keep your hands and fees away from the augers and discharge chute.
First, engage the remote chute control and set the chute direction to the right. This is a safety precaution to ensure the snow is not blowing back towards you. Next, engage the remote deflector control and set the deflector to the 'open' position.
Starting a Cold Snow Blower
For a cold start, first, turn the ignition key to the 'ON' position. This will engage the fuel pump and provide fuel to the carburetor. Next, pull the choke lever out and the priming bulb once to ensure the carburetor is filled with fuel. Then, locate the chords on your John Deere snow blower - some models have a single chord, while others have a toggle-type switch. Pull the chord firmly and smoothly until you feel resistance, then release it.
If the engine doesn't start on the first or second pull, wait a few seconds to allow fuel to travel to the carburetor. If it still doesn't start, try pulling the chord again a few more times. If the engine doesn't start after several attempts, let the machine rest for a few minutes before trying again. Once the engine starts, let it run for a few minutes to warm up before operating.
Starting a Warm Snow Blower
If your John Deere snow blower is already warmed up from previous use, the starting process is simplified. First, turn the ignition key to the 'ON' position. Then, locate the chords and pull the chord firmly and smoothly until you feel resistance, then release it.
If the engine doesn't start on the first pull, wait a few seconds and try again. If it still doesn't start, check for any issues like a clogged air filter or fuel-related problems. Always remember to turn off the snow blower when refueling to prevent fuel spills.
Regular maintenance and proper starting procedures will ensure your John Deere snow blower serves you well throughout the winter. Always refer to your John Deere snow blower owner's manual for specific instructions and tips tailored to your model. Now that you're armed with this knowledge, you're ready to tackle the winter's first snowfall. Happy snow blowing!