how to start ariens snowblower

How to Start Your Ariens Snowblower: A Comprehensive Guide

By Jessica Harris
AD

When the first snowflakes start falling, it's time to dust off your Ariens snowblower and gear up for winter. Starting your snowblower might seem intimidating, but with these simple steps, you'll be clearing your driveway in no time. Let's dive into how to start your Ariens snowblower safely and correctly.

Ariens, a leading brand in snow removal equipment, provides quality machines that can handle any snow challenge. Whether you've just purchased your Ariens snowblower or need a refresher, this guide will walk you through the starting process, ensuring a smooth and efficient operation.

Preparation Before Starting

Before you begin, make sure your Ariens snowblower is primed and ready to go. Check the fuel level, oil level, and ensure the spark plug is functioning correctly. Inspect the tires and overall condition of the machine to ensure it's in good working order.

AD
How to Start Ariens Snowblower
How to Start Ariens Snowblower
5 Best Snowblower Oils Reviewed in Detail (Summer 2026)
5 Best Snowblower Oils Reviewed in Detail (Summer 2026)
Ariens EFI Snowblower Won't Start? Your Ultimate Fix-It Guide
Ariens EFI Snowblower Won't Start? Your Ultimate Fix-It Guide

Lubricate the control cables,链条, and auger with the appropriate Ariens snowblower lubricant to ensure smooth operation. Once your machine is lubed up, you're ready to start.

Basic Starting Procedure

First, locate the choke lever on your Ariens snowblower. For cold weather, the engine needs additional fuel, so pull the choke out completely. Next, move the throttle lever to the 'Start' position and engage the interlock by holding down the bale handle.

an orange bike with gears attached to it
an orange bike with gears attached to it
Fix Ariens Snowblower That Won't Blow Snow! - DIY
Fix Ariens Snowblower That Won't Blow Snow! - DIY

Now, press down firmly on the start lever to engage the engine. You should hear it turn over. Keep the start lever engaged for about 7 seconds, then release it. Allow the engine to warm up for a minute or two, then push the choke back in and set the throttle to the desired speed.

Troubleshooting Common Issues

If your Ariens snowblower fails to start, here are a few troubleshooting tips:

AD

No Fuel: Ensure the fuel valve is open and that there's enough fuel in the tank. If not, fill up the tank and try starting again.

Old Fuel: Gasoline can go bad over time. If your snowblower hasn't been used in a while, drain the old fuel and replace it with fresh gas.

Worn Spark Plug: A faulty spark plug can prevent your Ariens snowblower from starting. Inspect the spark plug and replace it if necessary.

AD

Flooded Engine: If you've been holding down the start lever for too long, the engine might be flooded. Allow it to sit for a few minutes, then try starting again with the choke out.

Starting Your Ariens Snowblower After storage

If you've stored your Ariens snowblower for the season, follow these specific steps to ensure a smooth start-up:

First, prepare the machine by lubricating all moving parts, as mentioned earlier. Remove the plug wire from the spark plug, then grasp the pull cord firmly. Pull the start lever slowly until you feel resistance, then tug quickly to ensure the engine isn't seized. Replace the plug wire.

AD

Next, add a fuel stabilizer to your gas tank to prevent fuel breakdown during storage. Fill the tank to the top, then run the engine for a few minutes to circulate the treated fuel through the system. Allow the engine to cool, then cover your Ariens snowblower and store it in a dry place.

When you're ready to start again, follow the basic starting procedure, ensuring the fuel and spark plug are in good condition. With proper care and maintenance, your Ariens snowblower will be ready to conquer even the harshest winter storms.

AD