how to start a tecumseh snowblower

"Kickstart Your Tecumseh Snowblower: A Step-by-Step Guide"

By Michael Miller
AD

Winter's chill is upon us, and with it comes the inevitable task of clearing snow from our driveways and sidewalks. A reliable snowblower like the Tecumseh can be a lifesaver during this season. But how do you get started? Let's guide you through the process.

Before we dive in, ensure you've gathered all the necessary tools and equipment. You'll need a supply of fuel, a readily available hose for priming, and of course, your Tecumseh snowblower. Safety glasses, gloves, and ear protection are also essential for operating any power tool.

Understanding Your Tecumseh Snowblower

The first step in starting your Tecumseh snowblower is understanding its various parts and functions. Familiarize yourself with the machine's controls, chute, and auger. The control panel typically includes an ignition switch, feed lever, and an engaged snowblower switch.

AD
How to Set the Governor on a Tecumseh HMSK Snowblower Engine
How to Set the Governor on a Tecumseh HMSK Snowblower Engine
Snowblower Starter Rope Repair on 8-10HP Tecumseh Engine
Snowblower Starter Rope Repair on 8-10HP Tecumseh Engine
HOW TO Make Your Tecumseh SNOWKING Engine Idle & Stop Surging
HOW TO Make Your Tecumseh SNOWKING Engine Idle & Stop Surging

Your Tecumseh model might also have additional features like a manual recoil start, a deflector, and speed settings. Understanding these features will help you operate the machine safely and efficiently.

The Auger and Chute Assembly

The auger is the spinning part of the snowblower that lifts and moves the snow. It's crucial to keep this component free from debris and lubricate it regularly. The chute, on the other hand, is responsible for directing the snow. You can control where the snow is thrown by adjusting the chute's direction.

How to Start a Snowblower That Has Been Sitting
How to Start a Snowblower That Has Been Sitting
Craftsman MTD Snowblower Won't Start - Tecumseh Engine part 1
Craftsman MTD Snowblower Won't Start - Tecumseh Engine part 1

Pro tip: Always ensure the auger is clear of debris before starting your snowblower. A blocked auger can cause the engine to stall and potentially damage the machine.

Fuel and Oil Maintenance

Like any engine, the Tecumseh snowblower requires periodic fuel and oil maintenance. Use fresh gasoline with an octane rating of 89 or higher. Never store your snowblower with a full tank of gasoline to prevent fuel degradation and potential engine damage.

AD

Regularly check the oil level and condition. Change the oil every 25 hours of operation or at the beginning of each snow season, whichever comes first. Always use SAE 5W-30 oil for your Tecumseh snowblower.

Priming and Starting Your Tecumseh Snowblower

Now that you're familiar with your Tecumseh and have performed basic maintenance, it's time to start the engine. The first step in this process is priming the carburetor. This involves supplying fuel to the engine before starting it, ensuring a smooth start.

locate the primer bulb on your Tecumseh (usually a rubber bulb on the side of the engine). Press the primer bulb slowly five to seven times, allowing fuel to enter the carburetor. Be careful not to overprime as this can flood the engine.

AD

Starting the Tecumseh Snowblower

Once you've primed the engine, it's time to start it. Place the snowblower on a level surface to facilitate easy starting. Engage the locking security lever (included with many Tecumseh models for safety purposes).

Pro tip: If your Tecumseh has choke and throttle controls, turn the choke to 'Choke' and press the start button. Once the engine starts, gradually turn the choke to 'Run'. If your model has a manual recoil start, place the feed lever in the 'Neutral' position, engage the engine crank, and pull the recoil cord gently.

Warming Up the Engine

After starting, allow the engine to warm up for a few minutes. This prevents the oil from being cold when the snowblower begins working and ensures the engine runs smoothly. Once warmed up, operate the snowblower in low-speed settings while engaged.

AD

Gradually increase the speed settings as you gain more control over the machine. Remember to keep the auger clear of any obstaclessuch as rocks or uneven surfaces to prevent damage.

Cleaning and Storing Your Tecumseh Snowblower

After use, it's crucial to clean and store your Tecumseh snowblower correctly. Start by shutting off the engine and allowing it to cool down for a few minutes. Remove any snow or debris that has collected in the chute and auger.

Tecumseh recommends using a silicone-based lubricant on the auger after each use. Additionally, occasionally lubricating the drive belts and adjusting the belts as necessary will help extend the life of your snowblower.

Long-Term Storage

When preparing your Tecumseh for long-term storage, change the engine oil, drain the fuel, and run the engine to remove any remaining fuel from the carburetor. Store the machine in a cool, dry place, ensuring it's protected from the elements.

Pro tip: If you don't intend to use your snowblower for an extended period, it's a good idea to periodically run the engine for a few minutes to keep the components lubricated and in working order.

And there you have it! You're now equipped with the knowledge to start and maintain your Tecumseh snowblower safely and efficiently. Winter's snowfall might seem daunting, but with the right tool and know-how, it's a breeze. Happy snowblowing!

AD