Battery Dead? Here's How to Start Your Subaru with a Lifeless Key Fob
“Ever found yourself locked out of your Subaru, key fob in hand, but lifeless? You’re not alone. Modern key fobs, while convenient, canSometimes die at the worst possible moment. Let's explore how to start your Subaru even when your key fob's batteries have given up on you.
Before we dive into solutions, understanding how your Subaru works is crucial. Subarus often use transponder keys - these keys emit a unique signal to your car, telling it to unlock and start. So, if your key fob's batteries are dead, it can't send this signal. But don't worry, there are a few workarounds.
Using Your Spare Key
Most drivers keep a spare physical key at home or with them in case of such emergencies. If you have one, this is the easiest solution.
Here's how to use your spare key to start your Subaru:
Step 1: Insert and Turn
Insert the key into the ignition and turn it to the 'ON' position. This should unlock your steering wheel and allow you to start your car.
If your car is a newer model with an automatic start/stop button, you might need to press the 'ON' button once without depressing the accelerator to unlock the steering wheel.
Step 2: Start the Engine
Turn the key to the 'START' position to ignite your engine. If your car is newer, press and hold the start/stop button until the engine turns over.
Remember, this method only works if your spare key has a working transponder. If it doesn't, you'll need to try the next method.
Using the Alarm System and Valet Mode
If you don't have a spare key, or your spare key doesn't have a transponder, you can still access your car using the alarm system and valet mode. Here's how:
Step 1: Activate the Alarm
Try to open any of your car's doors. Since your key fob isn't working, the doors should remain locked, and the alarm should go off. Ignore the alarm for now.
If your car doesn't have an alarm, try honking the horn by pulling and releasing the lock/unlock knob rapidly until the horn beeps.
Step 2: Enter Valet Mode
Now, you'll need to use the valet mode feature. Valet mode allows you to temporarily disable the transponder system, enabling you to start your car without a working key fob. Here's how to do it:
Locate theillar door lock button on your driver's door. It's usually near the top and is larger than the regular lock buttons. Press and hold this button for about 10-15 seconds until the locks cycle through all positions. Your car should now be in valet mode, and the transponder system should be temporarily disabled.
Now, insert your key into the ignition and turn it to the 'ON' position. Your car should now start without a working key fob. Remember, valet mode is temporary - usually lasting about 10 minutes - so don't forget to replace your key fob's batteries or program a new one before it expires.
Locked out of your Subaru, but the clock's ticking and you're running late? Don't let a dead key fob hold you back. With these methods, you can be back on the road in no time. Now, go ahead, start that engine, and conquer your day!