how to start a stihl concrete saw

How to Start a Stihl Concrete Saw: Step-by-Step Guide

By Jessica Jackson
AD

Starting a concrete saw from the Stihl brand requires careful handling to ensure safety and longevity of the tool. These saws, designed for heavy-duty tasks, need to be operated with precision and understanding. Here's a comprehensive guide on how to start your Stihl concrete saw.

Before you begin, it's crucial to understand that safety is your top priority. Always wear appropriate Personal Protective Equipment (PPE), including safety glasses, gloves, and hearing protection. Additionally, ensure you're operating the saw in a well-ventilated area, as the dust produced can be harmful if inhaled.

Preparation Checklist

Before you start your Stihl concrete saw, there are several checks you should perform to ensure it's in good working condition.

AD
Secret way to start a Stihl Chainsaw? Test (MS400C) #shorts
Secret way to start a Stihl Chainsaw? Test (MS400C) #shorts
Fixing a Stihl Saw: Solutions for When It Won't Start
Fixing a Stihl Saw: Solutions for When It Won't Start
How to Start a Stihl Chain Saw
How to Start a Stihl Chain Saw

Firstly, inspect the Diamond Blade. Ensure it's securely fastened to the arbor and the correct size for your saw. A standard blade size for Stihl saws is 14 inches, but it's essential to check your specific model.

Check the Tension of the Blade

Incorrect blade tension can lead to poor cutting performance and could potentially cause the blade to fly off. To check the tension, apply pressure to the top of the blade with your thumb. There should be a slight bend but no excessive deformation.

How To Fix A Stihl Chain Saw Bar When The Oil Pump Is Not Working - Hunker
How To Fix A Stihl Chain Saw Bar When The Oil Pump Is Not Working - Hunker
a person using a cordless blow dryer on the ground
a person using a cordless blow dryer on the ground

To adjust the tension, turn the tension adjustment nut. Tighten to increase tension and loosen to decrease it. Be careful not to overtighten, as this can cause the blade to shatter.

Inspect the Chain and Guide Bar

The chain and guide bar are critical components of your saw. Check for any signs of wear or damage. Look for excessive play in the chain, which could indicate that the bar is warped or the chain is too loose.

AD

To lubricate the chain, apply bar and chain oil to the oil hole on the side of the crankcase. Allow the saw to idle for a short while to ensure the oil reaches all parts of the chain.

Starting the Concrete Saw

Now that you've checked your saw and ensured it's in good working condition, it's time to start it.

First, engage the chain brake by pulling the brake lever. This ensures that the chain does not start to move when you pull the starter cord.

AD

Prime the Saw

If your Stihl concrete saw has a prime bulb, press it gently a few times to prime the carburetor. This helps the saw start on the first or second pull, especially in cold weather or at high altitudes. If your saw doesn't have a prime bulb, proceed to the next step.

To start the saw, firmly and steadily pull the starter cord. It should take no more than two or three pulls to start the engine. If it doesn't start immediately, wait a few seconds for the fuel to settle before trying again.

Allow the Saw to Warm Up

After starting your saw, let it idle for a few minutes to allow the engine to warm up. This helps the oil to circulate and lubricate all the internal parts of the engine.

AD

During this time, you can also adjust the idle speed to ensure it's set correctly. The idle speed should be high enough to prevent the saw from stalling but low enough to prevent excessive fuel consumption.

Operating the Concrete Saw

Once your saw is warmed up, you can begin cutting. Always start the cut with the saw blade disengaged and move the saw on the surface before engaging the blade.

When cutting, apply steady and even pressure. Do not force the saw as this can cause it to bind and potentially cause injury. Keep the saw flat on the surface and maintain consistent blade engagement.

Safety While Cutting

Always keep your body behind the blade and avoid placing your hands in front of the blade. This helps to minimize the risk of injury in case the saw kicks back.

To make a corner cut, disengage the blade and rotate the saw to the desired angle. Once you're at the correct angle, engage the blade and continue cutting.

Cleaning and Maintaining the Saw

After each use, clean the saw to remove any dust or debris. This helps to prevent corrosion and extends the life of your saw.

To clean the saw, use a soft brush to remove dust from the air filter and the cooling fins. You can also use compressed air to remove any stubborn dirt. Always remember to disconnect the spark plug wire before cleaning to prevent accidental starting.

Finally, always store your saw in a dry place to prevent moisture from damaging the engine. With proper maintenance and care, your Stihl concrete saw will serve you well for many years to come."

AD