how to start a motorcycle that has been sitting for 2 years

Rejuvenate Your Ride: Reviving a 2-Year-Sitting Motorcycle

By Michael Smith
AD

So, you've dusted off your motorcycle after two years of idle time, and you're eager to hit the road again? Before you rev that engine, there are a few things you should know and do to ensure safety and longevity for your bike. Let's dive into how to start a motorcycle that has been sitting for 2 years without any nasty surprises.

First, let's address the elephant in the room - why shouldn't you just turn the key and ride off into the sunset? Well, when a motorcycle sits idle for a prolonged period, several components can degrade or fail. Deterioration of fuel, lubricants, and seals can cause issues like seized engines, clogged fuel lines, and broken parts. But don't worry, with some careful preparation and these step-by-step instructions, you can have your motorcycle purring like a kitten in no time.

Preparing Your Motorcycle for the First Ride

Before you even consider starting your motorcycle, there are some essential pre-start steps you should take to set yourself up for success.

AD
How to ride a motorcycle in 60 seconds #bike #biker #beginner #clutch #bikelife #learning 🎥&🎞️ @
How to ride a motorcycle in 60 seconds #bike #biker #beginner #clutch #bikelife #learning 🎥&🎞️ @
an old advertisement for a motorcyclist with instructions on how to ride it
an old advertisement for a motorcyclist with instructions on how to ride it
Best Beginner Motorcycle Guide
Best Beginner Motorcycle Guide

First things first, assess the condition of your motorcycle. Check for any signs of leaks, flat tires, or damage to the bodywork. If everything looks good, it's time to address some key systems.

Inspecting the Tires

Inspect your tires for cracks, wear, or any signs of dry rot. Motorcycle tires degrade over time, especially when stored in hot or cold environments. If your tires look questionable, it's best to replace them rather than risking a blowout on the road.

How To Ride a Motorcycle For Beginners (Complete A-Z Tutorial)
How To Ride a Motorcycle For Beginners (Complete A-Z Tutorial)
an info sheet with instructions on how to ride a bike and how to use it
an info sheet with instructions on how to ride a bike and how to use it

Even if your tires look fine, they've likely developed flat spots from sitting idle for so long. After inflating them to the recommended pressure, you can attempt to roll the bike gently to help the tires regain their round shape. If flat spots persist, a ride around the block should help work them out.

Inspecting the Fuel System

Old fuel can go bad over time, leading to clogged fuel lines, blocked injectors, or a faulty carburetor. To combat this, consider adding a fuel stabilizer to your gas tank before storing your motorcycle. A good quality stabilizer can extend the shelf life of your fuel by up to a year. However, if you didn't use a stabilizer, it's safer to drain the old fuel and start fresh.

AD

While you're at it, take a moment to clean any dirt or debris from your motorcycle's air filter. A clean air filter ensures proper engine performance and prevents unnecessary wear and tear on your engine.

Checking Your Motorcycle's Fluids and Lubricants

Before you bring your motorcycle back to life, you should check and potentially change several key fluids to ensure optimal performance and protect your engine.

oil, whether it's been two weeks or two years, should be changed regularly. Inspect the oil for contaminants or a dark, gritty appearance, which could indicate that it's no longer protecting your engine. If you find issues, change the oil and replace the filter.

AD

Checking Your coolant

Coolant, or antifreeze, is another critical fluid that can break down over time. Since replacing coolant can be a messy affair, you can use a test strip to check its condition first. If the color has changed or the freeze point is no longer adequate, it's time for a flush and refill.

While you're checking fluids, don't forget to inspect your motorcycle's brake fluid and clutch cable. Top off the brake fluid if it's low, and inspect the clutch cable for any signs of wear or corrosion. If everything looks good, your motorcycle is ready for a test start.

Performing a Test Start

With all the preparatory work out of the way, it's time to attempt a test start. Follow these steps to bring your motorcycle back to life:

AD
  • Put your motorcycle in neutral and engage the parking brake.
  • Turn the ignition to the "ON" position, but don't start the engine yet. Check that all your motorcycle's electrical systems, like the lights and gauges, are functioning correctly.
  • If everything looks good, turn the ignition to the "START" position and hold the start button briefly. Don't flood the engine by keeping the button depressed for too long.
  • The engine might cough and sputter at first, but give it a few seconds to wake up. If the engine doesn't start within a reasonable time frame, consult a professional mechanic to identify any potential issues.

Once your motorcycle's engine roars to life, let it idle for a few minutes to allow the oil to circulate and lubricate the engine components. Keep an eye on the temperature gauge to ensure it doesn't overheat. If everything looks good, take your motorcycle for a short ride to work out any remaining flat spots on your tires and confirm that all systems are functioning correctly.

Post-Ride Maintenance

After your successful test ride, don't forget to perform some post-ride maintenance to ensure your motorcycle continues running smoothly.

First, shut off the engine and let it cool for a few minutes before checking the oil level. If the oil level is significantly lower than before the ride, you may have a leak or a severe issue that requires professional attention.

Revising Your Motorcycle's Chain

Inspect your motorcycle's chain for signs of wear or excessive play. If the chain appears loose or shows significant wear, it's time for an adjustment or replacement. Keep in mind that a properly lubricated chain should last much longer, so make sure to clean and lube it regularly.

After your chain inspection, take a moment to check your motorcycle's belt or final drive system for any signs of trouble. Look for cracks, frays, or any foreign debris that could cause damage. If you find anything amiss, address it promptly to prevent further issues.

Getting the Most From Your Motorcycle

Finally, now that your motorcycle is running like new, it's essential to keep it that way. Regular maintenance, including regularly changing your oil and filters, cleaning your air filter, and inspecting your tires, will help ensure your bike's longevity and performance.

Additionally, avoid putting unnecessary strain on your motorcycle by avoiding excessive revving, high-speed acceleration, and riding through deep puddles or other potential hazards. By treating your motorcycle with care and performing regular maintenance, you'll enjoy many happy miles together.

So, there you have it - a comprehensive guide to starting a motorcycle that has been sitting for two years. With a little elbow grease and some careful preparation, your motorcycle will be purring like a kitten and ready to hit the open road. Happy riding!

AD