how to start a generac generator

How to Start a Generac Generator

By Mark Thomas
AD

Starting a Generac generator isn't just about flipping a switch or pulling a cord. It's about ensuring your home or business stays powered through grid outages, and understanding your generator is key to this. Here's a step-by-step guide to help you start your Generac generator safely and efficiently.

Whether you're a first-time generator user or a seasoned pro, this guide will walk you through the process, from understanding your generator's components to running it like a pro.

The Generac Generator: A Brief Overview

Before you dive into starting your Generac, it's crucial to understand its components. Generac generators come with a control panel, the engine, and an alternator. The control panel is your commander's center, housing your power options, run/stop switches, and voltage meter. The engine, usually a built-in Generac OHV engine, powers the alternator, which converts the engine's mechanical energy into electrical energy.

AD
For Beginners: Guide To Home Generator Basics
For Beginners: Guide To Home Generator Basics
Generator Fuel Guide: Gas, Propane, or Diesel?
Generator Fuel Guide: Gas, Propane, or Diesel?
Using your Generator.....what can you really run with it?
Using your Generator.....what can you really run with it?

Familiarize yourself with your specific model and its features. Generac offers a range of generators from home standby units to portable ones, each with unique specifications. Your owner's manual is a goldmine of information, providing detailed insights into your specific model.

Preparation Checklist: What You Need Before Starting

Starting your Generac generator involves more than just turning a key. You'll need to ensure safety first and have the right tools at your disposal. Here's a quick checklist:

The Ultimate Generator Buying Guide - Tool Crib of the North
The Ultimate Generator Buying Guide - Tool Crib of the North
Installing our new 24kw Generac generator with electrical wiring.
Installing our new 24kw Generac generator with electrical wiring.
  • Check your generator's controls and({}, 'path'));
  • Make sure you have a fully charged battery. If you're unsure, test it with a battery tester.
  • Ensure your generator is on a stability cone, or level ground for less wobble.
  • Locate your generator's maintenance items, including oil, oil filter, spark plugs, and air filter. They may be unique to your model, so check your owner's manual.

Once all boxes are ticked, you're ready to start your engine.

Start Your Generac Generator: Step-by-Step

Starting your Generac involves a few simple steps. Remember to keep safety in mind throughout the process. Here's how:

AD
  1. Prime the engine, especially if you haven't used it in a while. Most Generac generators have a manual primer bulb on the engine, usually near the air filter. Prime the engine 5-6 times.
  2. Locate the control panel and press the 'On' button to activate the control panel. Some models might need you to turn a key to the 'On' position.
  3. Press the 'Start' button or toggled switch to start the engine. If it doesn't start immediately, wait a few seconds, then try again.

Once the engine starts, let it warm up for a few minutes. This allows the oil to circulate, lubricating the engine.

Your generator is now ready to power your essential appliances. But before plugging in anything, ensure that your transfer switch is set to 'Generator' and that your appliances are ready to receive power. Always follow this safety rule: Never plug in or unplug appliances when the generator is running.

Maintaining Your Generac Generator

Regular maintenance is key to keeping your Generac generator in tip-top shape. Here's a quick rundown of maintenance tasks you should perform regularly:

AD

Before running the generator, remove the spark plug cap and shield, then use a spark plug wrench to remove the spark plug. Inspect the plug for fouling or other signs of damage, and replace if necessary. Reassemble the spark plug when you're done.

Checking and Replacing the Oil

Regular oil changes are crucial for your Generac generator's long-term health. Here's how to check and replace the oil:

Locate the oil fill opening and the oil drain plug. Using an oil filter wrench, loosen and remove the oil drain plug. Allow the oil to drain completely into a suitable oil drain pan. Wipe the area clean to prevent any contamination of the new oil. Replace the oil drain plug and tighten to the recommended torque.

AD

Add new SAE 10W-30 or SAE 30 engine oil (whichever is specified in your owner's manual) through the oil fill opening. Check the oil level using the dipstick. The level should be within the 'Full' range. If it's not, add or drain as necessary to be within this range.

Inspecting the Air Filter

Remove the air filter housing cover by opening the latches. The filter is located inside. If it's dirty or damaged, replace it with a new one. Regularly clean the housing to remove any dust or debris, ensuring optimal airflow to the engine.

Remember, all maintenance tasks should be performed according to your owner's manual. Regular maintenance keeps your generator in optimal shape and helps prevent untimely breakdowns.

Your Generac generator is now ready to keep you powered up during outages. Always ensure you're following safety guidelines and maintain your generator regularly. It's not just a machine; it's your lifeline during power cuts. So, keep it running smoothly, and you'll never be left in the dark again.

AD