how to start a craftsman snowblower

How to Start a Craftsman Snowblower: Step-by-Step Guide

By Daniel White
AD

Embarking on the journey to maintain a pristine, snow-free driveway or walkway during winter's wrath can be as easy as starting a craftsman snow blower. Learning how to operate and maintain these powerful machines prior to the first snowfall will ensure you're prepared when the white stuff begins to accumulate.

First, let's address the most frequently asked question: are snow blowers worth the investment? Absolutely, if you live in an area with heavy snowfall. They save time and back injuries that come from shoveling, and they're relatively easy to maintain and store away for the rest of the year. Plus, they come in various sizes and capacities to suit your specific needs.

Preparing Your Craftsman Snow Blower for Initial Use

Before you start your craftsman snow blower for the first time, make sure it's fully assembled and all safety features are functioning properly. This includes the handlebar controls, safety bail, and shear pin.

AD
HOW TO START A CRAFTSMAN SNOWBLOWER FOR BEGINNERS (Cold Start, Restart & Electric Start)
HOW TO START A CRAFTSMAN SNOWBLOWER FOR BEGINNERS (Cold Start, Restart & Electric Start)
the words how to start craftsman snowblower are in white on a gray background
the words how to start craftsman snowblower are in white on a gray background
HOW TO START A CRAFTSMAN SNOWBLOWER FOR BEGINNERS (Cold Start, Restart & Electric Start)
HOW TO START A CRAFTSMAN SNOWBLOWER FOR BEGINNERS (Cold Start, Restart & Electric Start)

Inspect the augers, which are the rotating blades that cut through and move the snow. Ensure they're intact and functioning. Check the scraper blade too - it should be making full contact with the surface to remove excess snow. Any visible damage should prompt professional servicing or repairs.

Understanding the Engine and Air Filters

The engine is another critical component. Look for any rust, corrosion, or signs of wear around the cylinder and crankcase. Also, check the air filters. They need to be clean and unobstructed to allow for proper air intake. Clogged filters can cause your snow blower to stall or have difficulty starting.

a red snow blower sitting on top of a garage floor next to boxes and shelves
a red snow blower sitting on top of a garage floor next to boxes and shelves
DIY Shade Sail Installation | Simple Tutorial for Sun Shade Sails
DIY Shade Sail Installation | Simple Tutorial for Sun Shade Sails

If your air filters are dirty, wash them with warm water and mild soap, then let them dry completely before reinstalling. Always replace them annually, as a part of your pre-winter maintenance routine.

Fueling Your Snow Blower Correctly

Fill your craftsman snow blower with fresh, unleaded gasoline and ensure you're using the correct fuel-to-oil ratio, typically 87:1. Use high-quality fuel stabilizers to maintain optimal engine performance during those times when you're not using your snow blower.

AD

Pro tip: Always turn off the engine before refueling to prevent sparks and ensure safety. Never fill the tank all the way - leave some space for fuel expansion and to accommodate any settling that might occur.

Learning How to Start and Operate Your Craftsman Snow Blower

Assuming you've primed the engine and adjusted the control levers to neutral, it's time to start your snow blower. Set the choke to ‘full’ and engage the starter. After the engine catches, you can begin clearing snow.

While operating, keep both hands on the handlebars and maintain a steady pace. If you experience resistance or find the engine laboring, you might be trying to clear too thick or deep a snowpack. Break it up first with a shovel before proceeding with the snow blower.

AD

What to Do When Encountering Obstacles

At times, you might come across obstacles like rocks or ice. Stop the engine immediately and raise the auger to those areas. Use your boot to loosen and clear the debris before resuming work.

Moreover, avoid clearing empty spaces or unloading snow over open drains, manhole covers, or into bodies of water. Also, do not force the snow blower through accumulations that seem too deep or too hard-packed. Always err on the side of safety and caution.

Safety Measures While Operating

Wear appropriate clothing suited to the weather, including boots that provide good stability and traction. Always operate your snow blower in an open area, away from power lines or windows. Keep children and pets indoors and refrain from adding extra evergreen branches or hangers to your machine for extra visibility - they can catch on objects and cause accidents.

AD

Lastly, always dismount the snow blower and disengage the drive controls before cleaning or performing any maintenance activities. Keep safety front of mind with every operation and interaction with this potentially hazardous machinery.

In snowy regions, preparation is key when it comes to operating a craftsman snow blower. By understanding your machine and proper safety procedures, you'll be ready when the first snow arrives, making your life much easier in the long run.

AD