how to start a ariens snow blower

How to Start an Ariens Snow Blower

By Robert Lopez
AD

Winter's first snowfall can be a magical sight, but it's not long before the fun turns to Back Breaking Chores when it comes time to clear your driveway and walkways. That's where an ARIENS snow blower comes in, transforming the once-dreaded task into a quick and manageable job. But before you can start enjoying the benefits of your new machine, you need to know how to start an ARIENS snow blower correctly and safely. Let's dive into the simple steps to get your snow blower up and running, ready to tackle even the harshest winter conditions.

First, let's address a common myth. Despite themisconception, you don't need to prime an electric snow blower like a typical lawn mower. Electric snow blowers are designed to pull fuel from the tank, so priming is unnecessary and could potentially cause damage. Now that we've debunked that, let's get started with the right technique to start your ARIENS snow blower.

Preparation Before Starting Your ARIENS Snow Blower

Before you attempt to start your snow blower, ensure you've taken the necessary safety precautions and prepared your machine for operation.

AD
the front end of a red motorcycle parked in a showroom
the front end of a red motorcycle parked in a showroom
How to Change a Snow Blower Friction Disc | Ariens®
How to Change a Snow Blower Friction Disc | Ariens®
How to Start a Snowblower That Has Been Sitting
How to Start a Snowblower That Has Been Sitting

First, always check the owner's manual for specific instructions relevant to your ARIENS model. Although this guide provides general steps, your snow blower might have unique qualities requiring specific considerations.

Inspect Your Snow Blower

Before each use, inspect your snow blower for any blockages or damage. Remove any debris from the auger and impeller, and ensure all safety switches are functioning correctly. Additionally, check the air filter and spark plug, replacing or cleaning them as needed.

Fix Ariens Snowblower That Won't Blow Snow! - DIY
Fix Ariens Snowblower That Won't Blow Snow! - DIY
How To Change The Oil In Your Ariens Snowblower
How To Change The Oil In Your Ariens Snowblower

前

Next, fill the fuel tank with fresh gas and use a fuel stabilizer to maintain engine performance between uses. Always use the correct fuel type and oil as recommended by ARIENS to prevent engine damage and maintain optimal performance.

AD

Lastly, warm up your ARIENS snow blower before starting. In cold weather conditions, allow the engine to idle for a few minutes to ensure oil is flowing correctly, protecting crucial engine components.

Safety First: Dress Appropriately

Before you begin clearing snow, dress appropriately for the weather conditions. Wear warm, breathable clothing, and use ear protection to minimize noise exposure. Goggles or safety glasses can help protect your eyes from debris, while sturdy, water-resistant gloves ensure proper grip and hand protection.

关

AD

Additionally, always clear the area around the snow blower before starting. Remove any obstacles that could pose a risk to you or others, ensuring you have enough space to operate the machine safely and efficiently.

Starting Your ARIENS Snow Blower

Now that you've prepared your snow blower and ensured your safety, it's time to start the engine. Follow these steps for a smooth and reliable start-up:

Remember, the starting process is different for gas-powered and electric snow blowers. We'll cover both to ensure you're equipped to handle your ARIENS machine.

AD

Starting a Gas-Powered ARIENS Snow Blower

1. Set the choke to the 'Choke' position to enrich the fuel-to-air mixture, making it easier to start the engine in cold weather.

2. Firmly press the primer bulb three to four times to richen the fuel further. Be careful not to overprime the engine, as excess fuel can cause flooding.

3. Move the operator control lever to the 'Start' position and pull the starter cord firmly and quickly. If the engine doesn't start, repeat the process, allowing the engine to rest for a few seconds between attempts. Once the engine starts, allow it to warm up for a few minutes before operating.

4. Gradually move the choke to the 'Run' position as the engine warms up. If the engine stalls, return the choke to the 'Choke' position, restart the engine, and slowly move the choke to the 'Run' position once it's running smoothly.

Starting an Electric ARIENS Snow Blower

1. Plug in the snow blower and ensure the power cord is free of kinks and debris, allowing it to move freely during operation.

2. Press and hold the safety key lock-out button while depressing the control lever to start the snow blower. Keep your finger on the safety key lock-out button and pull the starter toggle up to the 'On' position. The snow blower should start, and its auger and impeller should come to life.

3. Release the safety key lock-out button slowly, ensuring the control lever disengages and the auger and impeller stop. This simple safety measure prevents accidental operation and potential injuries.

Congratulations! You've successfully started your ARIENS snow blower and are now ready to tackle the harshest winter conditions. With proper maintenance and care, your snow blower will provide reliable performance season after season. Happy snow clearing!

AD