how to splice dyneema

Dyneema Splicing Secrets: Step-by-Step Guide

By Hannah Wilson
AD

Dyneema, a high-strength synthetic fiber, is renowned for its exceptional strength-to-weight ratio. When it comes to repairs or alterations, you might need to learn how to splice Dyneema for a secure and lasting join. This guide will walk you through the process, ensuring a strong and efficient splice every time.

Before starting, gather your materials: Dyneema rope, scissors or a sharp knife, a splicing tape like Marlow's DPX, and optionally, a heat source if using a heat-shrink sleeve.

Understanding Dyneema Splicing

Dyneema splicing involves unlaying the rope's outer strands, passing the core through these strands to lock them in place, then preraking and securing with tape or heat-shrink sleeves. It's a straightforward process that requires patience and precision.

AD
Dyneema End to End Splice — Rigging Doctor
Dyneema End to End Splice — Rigging Doctor
How to splice a Dyneema loop
How to splice a Dyneema loop
How to splice Dyneema onto low friction rings with Brummel lock splice - Yachting Monthly
How to splice Dyneema onto low friction rings with Brummel lock splice - Yachting Monthly

The most common Dyneema splices are the Eye Splice, used for making loops, and the End-to-End Splice, joining two ropes together. We'll focus on the Eye Splice here, as it's the most versatile.

Eye Splice: Preparation & Unlaying

Prepare your Dyneema rope by determining the length you'll need for your splice. For an eye splice, double the diameter of the rope is a good starting point. Mark this length and unreel about six inches of rope.

Making Two Equal Length Double Spliced Dyneema Lines
Making Two Equal Length Double Spliced Dyneema Lines
DYNEEMA: How-to splice it, and make a soft shackle (Rigging pt. I)
DYNEEMA: How-to splice it, and make a soft shackle (Rigging pt. I)

Next, unlay the rope. Most Dyneema ropes consist of twelve strands, twisted together. Carefully unravel these strands, keeping tension on the rope to make the strands easier to handle.

Eye Splice: Form & Puppering

With the strands laid out, determine the size of your eye loop. Pinch the strands together and fold them to form a U-shape at one end. This is your eye's starting point. Separate the strands back down to the mark you made earlier.

AD

Pass the unlaid portion back through the eye you've formed, pulling it taut. This process, called "puppering," locks the strands in place and forms the basis of your splice. Be sure to pull this section all the way through, so no part of the rope is left without spun fibers.

Securing the Eye Splice

Now that you've formed your eye, it's time to secure the splice. This step is crucial for the splice's strength and longevity.

Load and prerake your splice. This involves loading the splice by pulling on the eye and preraking, or tucking, each strand back through the eye. This tightens the splice and secures the strands in place.

AD

Securing with Splicing Tape

Once preraked, wrap your splicing tape around the splice, starting at the eye and working back. Overlap each wrap by half, ensuring the tape covers the entire splice.

Tension the tape as you wrap, pulling it tight to ensure an even, firm finish. Once you reach the end of the tape, cut it and secure it in place.

Securing with Heat-shrink Sleeves

If using a heat-shrink sleeve, follow the same preraking steps. Slide the sleeve over the splice, ensuring it covers the entire length.

AD

Heat the sleeve, using a heat gun or heat source recommended by the manufacturer. As it shrinks, it'll tighten around the splice, securing it. Allow it to cool before handling, and test your splice to ensure it's secure.

Regularly inspect your Dyneema splices for any signs of wear or damage. With proper care and maintenance, a well-spliced Dyneema rope can last for years. Happy splicing!

AD