How to Shorten Joggers
Tired of your joggers being too long and getting in your way while running or working out? Shortening them might seem daunting, but it's actually quite simple. In this guide, we'll walk you through the process, step by step, ensuring you'll have the perfect length joggers for your next workout.
Before we dive in, remember that the perfect hem length depends on your personal preference and how much motion you expect from your joggers. A general rule of thumb is to shorten them about 1 to 2 inches from the original length. This should give you enough room to prevent tripping while still avoiding excess fabric.
Choosing the Right Length to Shorten
Deciding the right length is crucial. If you're unsure, start by trying on the joggers and marking the spot where you'd like them to end with a fabric pencil or chalk. Then, add about 0.5 inches for hem allowance. This will ensure that your joggers won't fray and will maintain their original structure even after washing.
If you're unsure about the length, consider trying on pants of a similar length at a store. This can give you a better idea of what looks and feels right.
Preparing Your Joggers for Hemming
Before you begin, you'll need to gather a few tools. These include sharp scissors (fabric scissors if you have them), a ruler, a fabric pencil or chalk, straight pins, and a Sewing machine (or you can do it by hand).
Once you've decided on the length, use your fabric pencil or chalk to mark the spot where you'll cut. Use the hem allowance to ensure you're cutting at the right spot. Carefully cut along the mark with your scissors.
Hemming Your Joggers
The actual hemming process involves folding the raw edge of the fabric you just cut, then stitching it in place to create a clean finish. You can do this by hand or use a sewing machine. Here's a simple step-by-step guide:
1. **Fold the Fabric**: Fold the raw edge of the fabric upwards, towards the wrong side (the inside of the jogger). The folded edge should cover the raw edge completely.
2. **Press with an Iron**: Use an iron to press this fold, ensuring it stays in place. This step is particularly helpful if you're sewing by hand.
3. **Pin the Fold**: Use straight pins to secure the fold in place. Pin about every half-inch to ensure the fold stays even and flat.
4. **Sew the Hem**: Using your sewing machine or a needle and thread, stitch along the edge of the fold, as close to the folded edge as possible. Backstitch at the beginning and end to secure your stitches.
5. **Press Again**: Once you've finished sewing, use your iron to press the hem again on the wrong side. This will help the stitches lie flat and give your hem a clean, finished look.
Alternative Methods for Shortening Joggers
If you don't feel comfortable sewing or want a less permanent solution, there are other methods you can try.
1. Use a No-Sew Hem Tape: No-sew hem tape consists of a double-sided adhesive backed by a thin material. You can use it to fold and secure the hem in place, eliminating the need for sewing.
2. Use Fabric Glue: Similar to no-sew hem tape, fabric glue can be used to secure the hem in place. Simply apply the glue along the folded edge, allow it to dry, and then press the hem with an iron.
Remember, these alternative methods are not as durable as sewing and may not hold up as well over time or through repeated washings. However, they can be a good starting point if you're new to altering your clothes.
Now that you know how to shorten joggers, you can revamp your wardrobe and ensure your workout clothes fit perfectly. Whether you're a seasoned sewer or just starting, the process is simple and rewarding. So go ahead, try it out, and enjoy your perfectly fitting joggers during your next run or workout!