how to shorten jacket sleeves with lining

How to Shorten Jacket Sleeves with Lining: A Quick Guide

By Joshua Lewis
AD

Ever found yourself swimming in a pool of fabric with your jacket sleeves? It's a common problem, especially among those who have broad shoulders or long arms. Fortunately, there's a simple solution: shorten those sleeves! Today, we're going to guide you through the process, keeping your jacket's lining intact. Let's dive in.

Before we start, gather your materials: your jacket, scissors, tailor's chalk, pins, a sewing machine with a universal needle, and matching thread. Also, ensure you have plenty of time and patience. Now, let's roll up our sleeves and get started.

Preparing Your Sleeve

First things first, try on your jacket and decide how much fabric you need to remove. Use tailor's chalk to mark where you want the new hem to be. Remember, you can always take off more fabric, but you can't add it back.

AD
How To: Shorten Sleeves with a Lining
How To: Shorten Sleeves with a Lining
someone holding up a piece of cloth with the words how to shorten a jacket sleeve
someone holding up a piece of cloth with the words how to shorten a jacket sleeve
How to shorten jacket sleeves with buttons - Naomi Fata
How to shorten jacket sleeves with buttons - Naomi Fata

Next, lay your jacket flat on a table, marking the line you drew on the sleeve with pins. We'll also pin the lining to the sleeve to keep it in place during the shortening process.

Marking the Fold

Fold the sleeve up, right sides facing, along the line you've marked. Use pins to secure the fold. This will be your new hem.

How to shorten jacket sleeves easily! Miarti 🧵✂️
How to shorten jacket sleeves easily! Miarti 🧵✂️

Now, mark the new hemline onto the sleeve with tailor's chalk. This will ensure you have a clear guide when trimming.

Trimming the Fabric

Cut along the line, leaving a small seam allowance (around 1/4 to 1/2 inch). Be careful not to cut the lining. If the lining is sewn to the sleeve seam, you may need to unpick these stitches before trimming.

AD

Try on your jacket to see if the sleeves are now the right length. If they are, great! If not, repeat the process until you're happy with the length.

Hemming the Sleeve

Now that your sleeve is the right length, it's time to create a nice, rounded hem. First, press the new hem with an iron to crease the fold.

Next, pin the hem in place, removing any bulk by clipping the fabric at the base of the hem if necessary. Make sure to keep the lining folded over the sleeve, securing it with pins.

AD

Sewing the Hem

Sew the new hem using a simple folded hem stitch. Start from the underarm seam and work your way around the sleeve, ensuring you keep the lining tucked inside. Backstitch to secure your stitches.

Once you've sewn the entire hem, use a small, sharp pair of scissors to trim any excess thread. Now, try on your jacket. Those sleeves should fit just right!

Checking the Lining

Finally, ensure the lining is still sitting neatly inside the sleeve. If it's bunched or twisted, gently pull it smooth and stitch it back in place if necessary.

AD

Now that your sleeves are shortened and your lining is intact, you'll enjoy a more comfortable, tailored fit. Wear your jacket with pride!

AD