how to shim cabinets

Mastering Cabinets: How to Shim Like a Pro

By Jessica Martinez
AD

Ever felt like your cabinets are a bit wobbly or uneven? This can happen due to worn-out hinges, settling of your home, or improper installation. To fix this, you can learn how to shim cabinets. Shimmed cabinets not only look better but also function more efficiently and safely. Here's a step-by-step guide to help you through this process.

Before you start, gather your materials. You'll need some shims - these are thin pieces of wood usually found in the lumber section of your local hardware store. Pencil, cabinet screws, a screwdriver, and a level will also be essential. It's crucial to work carefully and patiently to get the best results.

Understanding the Shimming Process

Shimming is essentially filling the gap between the cabinet and the wall to ensure a tight, even fit. This process helps to create a snug, level surface that ensures your cabinets are both functional and appealing.

AD
How to Shim Cabinets - Woodworker Express Blog
How to Shim Cabinets - Woodworker Express Blog
Adding Trim to Cabinets for Shaker-Style Look - Crazy Life with Littles
Adding Trim to Cabinets for Shaker-Style Look - Crazy Life with Littles
How To Install Kitchen Cabinets
How To Install Kitchen Cabinets

It's important to note that shimming should be done after you've installed your cabinets but before you've fully attached them to the wall. This allows you to make adjustments as needed for a perfect fit.

Identifying the Gaps

Begin by identifying where the gaps are. Use a level to ensure your cabinets are straight, and look for any areas where the cabinet doesn't sit flush against the wall. These are the spots that need shimming.

How to Give Your Kitchen Cabinets a Shaker Style Makeover
How to Give Your Kitchen Cabinets a Shaker Style Makeover
DIY Slim Shaker Cabinet Doors For Under $120
DIY Slim Shaker Cabinet Doors For Under $120

Don't be disheartened if you find several gaps. It's common for cabinets to settle over time or to have slight variations in construction that cause them to fit poorly. With a bit of patience and the right tools, these issues can be easily rectified.

Choosing the Right Shim

Once you've identified the gaps, choose shims that are slightly wider than the gap itself. It's better to start with a larger shim and trim it down if needed than to start with a shim that's too small and have to use multiple shims to fill the gap.

AD

Shims are typically made of wood, but if you're dealing with a large gap or humidity in your area, consider using plastic or composite shims. These are less likely to warp or swell over time.

Shimming Cabinets

Now that you've identified the gaps and chosen your shims, it's time to start the shimming process.

Start by placing the shim in the gap. Use a pencil to mark where you need to trim the shim. Then, carefully cut the shim to size using a utility knife or a handsaw. Be cautious not to cut too much off - remember, you can always trim more but you can't add back what you've cut off.

AD

Securing the Shim

Once you've cut your shim to the right size, apply some wood glue to the narrow edge of the shim. This will help hold the shim in place and prevent it from moving over time.

Press the shim firmly into the gap, using the level to ensure that it's even with the surface of the cabinet. Then, use a cabinet screw to secure the shim in place. You may need to pre-drill a hole to avoid splitting the shim. Drive the screw in just until the head is flush with the surface of the shim.

Finishing Up

Repeat this process, working your way around the cabinet until all the gaps are filled. If you find any particularly large gaps, don't hesitate to use multiple shims. Just be sure to secure each one with wood glue and a cabinet screw.

AD

Once all the shims are in place, use your level to ensure that your cabinets are still straight. If necessary, adjust any of the shims until your cabinets are level and plumb. Then, you can fully secure your cabinets to the wall.

Post-Shimming Care

With your cabinets shimmed and secured, you're almost done! But there are a few final steps to ensure the longevity of your cabinets.

First, paint or stain your shims to match the color of your cabinets. This will help them blend in and look like they're part of the cabinet itself. Then, check your shims periodically to ensure they're still secure. If you notice any bowing or movement, don't hesitate to reinforce them.

Shimmed cabinets not only look better, but they also work better. By taking the time to properly shim your cabinets, you're investing in the functionality and longevity of your kitchen or bathroom. So, don't be discouraged by those initial gaps - with a bit of patience and the right tools, you can transform your cabinets into a beautiful, functional space.

AD