how to shim a starter on a 350 chevy

How to Shim a Starter on a 350 Chevy: Step-by-Step Guide

By Rachel Miller
AD

How to Shim a Starter on a 350 Chevy: A Comprehensive Guide

The dreaded "clunk" when turning your ignition key is often a sign of a worn-out starter on your 350 Chevy. But before you rush to replace it, you might want to consider shimming. Shimming can extend the life of your starter and save you money. Let's dive into the process.

First, let's understand what shimming is. Shimming involves inserting a metallic shim between the starter motor and the flywheel to improve the starter's engagement. This maximizes the starter's effectiveness while minimizing wear and tear.

Gathering Your Tools and Materials

Before you begin, make sure you have the necessary tools and materials:

AD
Chevy Nova Starter Tech
Chevy Nova Starter Tech
two pictures show the inside workings of a vehicle engine and how to change it's gears
two pictures show the inside workings of a vehicle engine and how to change it's gears
TECH THIS OUT! | ’49 CHEVY GETS AN S10 CHASSIS SWAP
TECH THIS OUT! | ’49 CHEVY GETS AN S10 CHASSIS SWAP
  • A set of metric sockets and wrenches
  • A breaker bar
  • Pliers and a hammer
  • Starter shims (available at most auto parts stores)
  • Maybe a little bit of luck (joking - sort of)

Preparation: Disconnecting the Battery and Removing the Starter

The first step is disconnecting your battery to prevent any electrical shorts. Then, locate and remove the starter by taking out the bolts securing it to the engine block.

Remember to support the starter with a jack or a piece of wood to prevent it from falling as you remove the last bolt. Once off, you'll see the worn-out surface of the starter drive. Now, it's time to introduce the shim.

1963-1972 Chevy Pickup Shortbed Conversion With a Kit From Brothers
1963-1972 Chevy Pickup Shortbed Conversion With a Kit From Brothers

Choosing and Installing the Shim

Shims come in varying thicknesses. The goal is to fill the gap between the starter drive and the flywheel. Start with the thinnest shim and work your way up until the starter drive makes full contact with the flywheel.

To install the shim, simply place it between the starter drive and the flywheel. Then, carefully reattach the starter to the engine block, using the bolts you removed earlier. Take your time to ensure everything is properly lined up.

AD

Testing the Starter and Reassembly

Before you reassemble everything, test your starter. Reconnect your battery and try starting your engine. If the engine cranks smoothly, congratulations - you've successfully shimmed your starter!

If the starter doesn't engage properly, don't despair. Remove the starter again and try a different shim thickness. Be patient, and soon enough, you'll find the perfect fit.

Reattaching the Wiring and Final Reassembly

After ensuring your starter works perfectly, reattach the wiring harness and any other components you removed during the process. Then, securely fasten the air cleaner and any other parts you had to take off.

AD

Finally, conscientiously clean your work area, and don't forget to admire your handiwork. You've just extended the life of your starter and saved money on a replacement. Not bad, huh?

Always remember that prevention is key. Regular maintenance checks can help you catch wear and tear early, and with luck, you'll never have to deal with that frustrating "clunk" again. Happy wrenching!

AD