SharpenBenchmadeKnife
Sharpening a Benchmade knife isn't just about maintaining its functionality; it's an art that requires patience, precision, and the right tools. Whether you're an avid outdoorsman, a professional chef, or a knife enthusiast, mastering this skill can extend the life and performance of your knife significantly. Let's dive into a step-by-step guide on how to sharpen a Benchmade knife, ensuring it stays as sharp and reliable as the day you bought it.
Before we begin, it's crucial to understand that Benchmade knives come with exceptional factory edges. However, even the best edges dull with use. Regular sharpening can restore that factory edge and maintain the overall quality of your knife. But first, let's gather the tools needed for the job.
Choose the Right Sharpening Tool
Selecting the correct sharpening system is vital for maintaining your Benchmade knife's edge geometry and performance. Here are two popular methods:
1. Whetstones (Sharpening Stones): Whetstones come in various grits, with coarse stones (e.g., 1000 grit) ideal for aggressive repairs, and fine stones (e.g., 8000 grit) perfect for final honing.
2. Electric Knife Sharpener: Electric sharpeners offer convenience and are user-friendly. They're available as pull-through or guided rod systems, with bench and portable models. Benchmade recommends the Work Sharp Ken Onion Edition for their knives.
Understanding Your Knife's Edge
Before sharpening, familiarize yourself with your Benchmade knife's blade geometry. Most Benchmade knives feature a 440C or 154CM stainless steel blade with a popular edge profile: a 15-17° inclusive angle. Knowing this can help you maintain the proper sharpening angle during the process.
Moreover, understanding the spine, edge, and bevel is essential. The spine is the thickest part of the blade. The edge is the thinnest part, where the blade meets the spine. The bevel is the ground surface that angles down from the spine to the edge. In a double-edged knife, there are two bevels and two edges.
Preparation: Clean and Row Taper
Before sharpening, ensure your knife is clean. Use a soft cloth or brush to gently remove any residue. Next, perform a row taper, a Benchmade recommended technique that aligns the microscopic burr created during sharpening on one side of the blade. To do this, slightly angle the blade as you draw it across a leather strop or rubber band multiple times.
Row tapering helps ensure an evenly sharp edge and prevents the burr from snagging on fabrics or other surfaces. It's a crucial step that often gets overlooked but significantly improves the overall sharpness of your knife.
Sharpening Your Benchmade Knife: Step-by-Step
Now that you're familiar with the necessary tools and techniques let's dive into the sharpening process itself. We'll focus on the whetstone method as it provides more control and allows you to maintain the original edge geometry better.
You'll need a few additional supplies: a honing angle guide (optional but recommended), light machine oil, and a honing rod or leather strop for finishing.'
Set Up Your Workspace and Whetstones
Choose a stable, non-slip surface to place your whetstones. Position them so that the coarse stone (1000 grind) is on the left, followed by the fine stone (8000 grind). Pour a few drops of light machine oil onto the stones to help lubricate and cool the blade during sharpening.
Next, angle the blade against the honing angle guide (if using) or your index finger to maintain the proper 15-17° inclusive angle throughout the sharpening process. This angle is critical to maintain the original edge geometry and performance of your Benchmade knife.
Sharpening the Blade
Hold the knife by the handle, with the cutting edge facing away from you. Gently draw the blade across the coarse whetstone, applying even pressure along the entire length of the blade. Start at the spine, and gradually angle the blade up as you move towards the tip. This forgives any slight angle variations and helps maintain the original edge grinding.
Repeat this process on the other side of the blade, ensuring both sides receive an equal number of passes. Be consistent with the angle and pressure to achieve an even edge. A common mistake is applying too much pressure or using an incorrect angle, which can result in an uneven or damaged edge. Remember: slow and steady wins the race when sharpening your knife.
After completing the necessary passes on the coarse stone (Benchmade recommends 10-15 draws per side), move to the fine whetstone for honing. Use the same technique, maintaining the correct angle and pressure. This step refines the edge, removing any remaining wire edge or micro-burrs.
Finish by row tapering with a honing rod or leather strop to realign any remaining microscopic burrs and ensure a clean, sharp edge.
Inspect Your Work
Once you've completed the sharpening process, carefully inspect your knife's edge using the "thumbnail test." Wrap your thumb and index finger around the blade, with the sharp edge facing down. Draw your thumb gently across the edge, keeping it perpendicular to the blade. A sharp edge will shave a thin layer of skin without gouging or snagging. If your edge feels dull or catches, repeat the sharpening process until you achieve the desired results.
Maintenance and Care Tips
Proper maintenance can extend the life and performance of your Benchmade knife significantly. Here's how to keep your knife in top condition:
Regularly Clean and Dry: After each use, gently clean your knife with a soft cloth and warm water. Dry it thoroughly to prevent corrosion.
Strop Often: Regular stropping helps maintain the edge's sharpness between sharpening sessions. Benchmade recommends using the row taper technique with a leather strop or rubber band daily.
Store Responsibly: Keep your knife honed, not hung. Axes and hatchets should be hung with the blade up to prevent corrosion. Knives should be stored with the blade pointing down to protect the edge and prevent nicks. Never store your knife closed in a pocket or bag, as this can dull the edge and cause damage.
The final step in maintaining your knife involves occasional sharpening. Following this guide will help you restore your Benchmade knife's edge to its original factory sharpness. Remember, practice makes perfect, and each sharpening session presents an opportunity to hone your skills.
The satisfaction of sharpening your own knife can be deeply rewarding, too. It's a testament to the craftsmanship of the blade and your dedication to preserving its performance. So grasp your Benchmade knife, steady your hands, and sharpen on. Happy honing!