**How to Sew a Blanket with a Perfect Border: Step-by-Step Guide**
Adding a border to a homemade blanket not only enhances its aesthetic appeal but also reinforces the edges, preventing fraying. It's a skill you can master with some practice and patience. Let's dive into the step-by-step process of sewing a blanket with a border.
Before you start, gather your materials: a blanket (preferably a solid color for a contrasting border), border fabric (twice the width of your blanket plus 1 inch), scissors, measuring tape, fabric marker, sewing machine, all-purpose polyester thread in a color matching your border, and an iron.
Preparing Your Materials
First, ensure your blanket is clean and free of any defects. For the border, choose a fabric that complements your blanket, preferably a contrasting color for a bold look.
Measure the perimeter of your blanket. Divide this measurement by the width of your border fabric to determine how many strips you need. Each strip should be your blanket's width plus 1 inch for seam allowance.
Cutting the Border Strips
Using your measuring tape, mark the width of your blanket plus 1 inch along the length of your border fabric. Cut along these lines to create your border strips. Ensure you have enough strips to cover the entire perimeter of your blanket.
If your blanket is larger than your border fabric's width, you'll need to sew the border strips together first. Overlap them by 1/2 inch, right sides facing, and sew along this line. Press the seam allowance open and repeat until all strips are attached.
Hemming the Border Strips
Next, fold under 1/4 inch along the long edge of each border strip and press. Fold it again by 1/4 inch to create a double fold, and press once more. This will be the final hemmed edge of your border.
Stitch along the inner folded edge to create a clean, neat finish. This step might seem trivial, but it prevents the raw edge from fraying and gives your border a professional look.
Sewing the Border Onto the Blanket
Before you start sewing, lay out your blanket and border strips to ensure they're appropriately positioned. Start with a border strip at the top of your blanket.
With right sides facing, align the raw edge of the border strip with the raw edge of the blanket, leaving a 1-inch seam allowance at the top. Ensure the hemed edge of the border strip is along the edge of the blanket.
Sewing the Border
Starting at a corner, use a 1/4-inch seam allowance to sew the border strip onto the blanket. At each corner, sew up to the corner of the blanket, then lift the needle, turn the corner, and continue sewing, creating a neat, mitered corner.
Continuing Around
Once the first strip is sewn on, continue around the blanket, sewing each strip to the next using the same method. When you reach the starting point, overlap the last strip by 1/2 inch and sew.
It's a common mistake to pull on the fabric while sewing. Instead, guide it gently through the machine, allowing the feed dogs to do their job.
Finishing Up
Once you've sewn the entire border on, you'll need to neaten the edges. First, trim any excess fabric at the corners, ensuring you don't clip into your stitching.
The final touch is to fuse a narrow fabric strip (like bias tape or Serge) around the outer edge of your blanket. This adds a decorative finish and encapsulates the raw edge, preventing fraying.
Your blanket with a border is now complete. This skill is highly sought-after and will allow you to create unique, beautiful blankets. The next step might be experimenting with different border designs or trying edge-to-edge quilting. Happy sewing!