how to setup static ip on router tp link

How to Set Up Static IP on TP-Link Router

By David Jackson
AD

Ever wished for a consistent internet identity for your devices? A static IP for your router can make this a reality. Here's a step-by-step guide on how to set up a static IP on a TP-Link router, ensuring your connectivity is reliable and secure.

Before we dive in, note that having a static IP gives your router a permanent address, unlike dynamic hosting. This consistency can vereinfachen tasks like remote access and network management. Let's set this up in just a few minutes.

Accessing Router Settings

Our first step takes us to the router's user interface. Here's how to access it:

AD
How to setup Archer AX12 | AX1500 Wi-Fi 6 Router | TP-link AX1200 Dual band WIFI router
How to setup Archer AX12 | AX1500 Wi-Fi 6 Router | TP-link AX1200 Dual band WIFI router
Pix-Link : Set up repeater mode in 3 minutes | NETVN
Pix-Link : Set up repeater mode in 3 minutes | NETVN
Setup Easy Mesh On Tp-Link Dual Band WIFI Router To Fix Signal Problem | Add Satellite node to mesh
Setup Easy Mesh On Tp-Link Dual Band WIFI Router To Fix Signal Problem | Add Satellite node to mesh

1. Connect your device to the router's network. You can do this wirelessly or via an Ethernet cable.

2. Open your preferred web browser and navigate to 192.168.1.1 or tplinkwifi.net, which are default IP addresses and web addresses for TP-Link routers.

How To Setup Tp Link Router As WIFI Extender | Tp Link WiFi Extender
How To Setup Tp Link Router As WIFI Extender | Tp Link WiFi Extender
How to Set Up TP-LINK WiFi-N Wall Plug Range Extenders
How to Set Up TP-LINK WiFi-N Wall Plug Range Extenders

Log In to Your Router

Logging in is the next crucial step. Follow these steps:

1. You'll be prompted for a username and password. The default credentials are usually 'admin' for both fields. If you've changed these, use your updated details.

AD

2. After successful login, you'll be taken to the router's management page, where we can now change settings.

Setting a Static IP Address

Now that we're logged in, we can commence setting up the static IP:

1. Navigate to the 'Network' section and click on 'WAN'. Here, you'll find options related to your internet connection.

AD

Change the IP Address Type

The following steps will guide you through changing your IP address type from dynamic to static:

1. Under 'Connection Type', select 'Static IP'. Click 'Save'.

2. The router will ask you to reboot. Click 'OK' to proceed. Wait for the router to reboot, then log back in.

AD

Set the Static IP

Now, we'll set the actual static IP:

1. Back in the 'WAN' settings, you'll find fields for 'IP Address', 'Subnet Mask', 'Gateway', and 'Primary DNS'.

2. Fill these with the appropriate values from your ISP. If you're unsure, contact your provider. Once done, click 'Save'.

Congratulations! You've successfully configured a static IP on your TP-Link router. Now, your router will consistently use the same IP address, ensuring a stable internet connection. Keep this IP logged for future reference and security purposes. Happy browsing!

AD