how to set up a dragonhawk tattoo gun

How to Set Up a Dragonhawk Tattoo Gun

By John Davis
AD

Embarking on the journey to set up your first tattoo gun, specifically a dragonhawk machine, is an exciting endeavor. This powerful, dual-coil tattoo gun, known for its versatility and precision, allows you to create intricate designs with ease. Let's dive into a step-by-step guide on how to set up your dragonhawk tattoo gun, ensuring you're ready to ignite your artistic prowess on skin.

Before we start, ensure you have all the necessary components: your dragonhawk tattoo gun, tattoo needles, a power supply, elbow asp, grips, and a few sets of O-rings. Also, consider having latex gloves, saline solution, and a magnifying loupe for better visibility and hygiene.

Understanding Your Dragonhawk Tattoo Gun

Familiarize yourself with your dragonhawk tattoo gun first. This machine typically comes with two tattoos bolts for easy access and adjustment of needle strokes, a DC motor for consistent power, and a footswitch for hands-free operation.

AD
#DRAGONHAWK. #ฟอดโปร. 7499.- ถูกกว่าหน้าเว็บครับ!!! #aofchetattoo #เครื่องสักไร้สาย #ออฟเช่
#DRAGONHAWK. #ฟอดโปร. 7499.- ถูกกว่าหน้าเว็บครับ!!! #aofchetattoo #เครื่องสักไร้สาย #ออฟเช่
Tattoo Lining By Dragonhawk Fold Tattoo Pen and Mast Pro Cartridges
Tattoo Lining By Dragonhawk Fold Tattoo Pen and Mast Pro Cartridges
Learn to tattoo yourself at home (w/a tattoo gun)
Learn to tattoo yourself at home (w/a tattoo gun)

Safety is paramount in tattooing. Ensure your workspace is clean and well-lit. Always wear latex gloves when handling needles and maintain good hygiene practices.

Assembling the Tattoo Gun

Start by cleaning your dragonhawk tattoo gun with 70% isopropyl alcohol or rubbing alcohol to remove any grease or debris. Once dry, insert the bar into the tattoo gun and secure it with the set screw.

DRAGONHAWK MAST TATTOO PEN REVIEW | HOW I DO MY OWN TATTOOS | DRAGONHAWK TATTOO
DRAGONHAWK MAST TATTOO PEN REVIEW | HOW I DO MY OWN TATTOOS | DRAGONHAWK TATTOO
Beginner Tattoo Machine Setup Guide for New Tattoo Creators
Beginner Tattoo Machine Setup Guide for New Tattoo Creators

Next, install the unattached coil into the coil bracket. Drill the needle bar through the elastomer cord, then slide the assembled coil bracket onto the rear of the Dragonhawk. Secure it with the flat head screw. Ensure the coil alignment is correct, allowing the necessary bar movement.

Installing and Tuning the Needle

Thread the needle onto the needle bar, ensuring the flat side of the needle faces outwards. Tighten the needle grip to secure it. Then, rotate the adjusting needle bolt clockwise to elevate the coil. This step is crucial for setting your needle depth.

AD

The ideal needle depth allows the needle to barely touch your skin when you apply pressure. Adjust the bolt until the needle protrudes just slightly from the ink well. Test the setup on a scrap piece of leather or practice skin to ensure smooth, firm needle action.

Connecting the Power Supply

Your dragonhawk tattoo gun needs a power supply to function. Connect the power supply cord to your machine's voltage control knob, ensuring it's secure and firmly in position. Remember, incorrect voltage settings can damage your tattoo gun or cause suboptimal performance, so careful adjustments are necessary.

The footswitch is a vital component that allows you to control your machine hands-free. Connect it securely to the power supply, ensuring the colors match correctly between the footswitch and the power supply. Test your set-up to ensure the footswitch works correctly.

AD

Checking and Calibrating Your Machine

Before you begin tattooing, it's crucial to test your machine. Clip the power cord to the power supply, then turn it on. Adjust the machine's settings to correspond with the needle depth you've dialed in. Most tattoo artists start at 7-10mm for lining and 1-2mm for coloring.

Carefully apply ink to the tattoo gun, then place the barb in the center of a practice design. Turn on the footswitch, maintaining the pressure while monitoring the needle performance. Adjust your settings as necessary until you achieve a smooth, consistent line.

Now that your dragonhawk tattoo gun is set up and tested, consider practicing on bananas, oranges, or pigskin to hone your skills before tattooing on human skin. Always remember that practice makes perfect, so be patient and persistent.

AD

In the world of tattooing, continuous learning and refining your craft are key. As you gain experience, you'll learn to adjust your dragonhawk tattoo gun's settings to suit your artistic needs and preferences. Happy tattooing!

AD