How to Set Time on Hayward Pool Pump: Step-by-Step Guide
Setting the time on your Hayward Pool Pump can enhance its efficiency and extend its lifespan significantly. This guide will walk you through the process, ensuring your pool pump runs optimally and safely.
Before we dive into the steps, ensure your Hayward Pool Pump is a model with a programmable timer. If it's an older model, you might need to replace it with a newer, programmable model for this feature.
Understanding Your Pool Pump Timer
The Hayward Pool Pump timer uses the 24-hour format and can be programmed for up to two daily operation periods. Familiarizing yourself with your timer's display and buttons will make the process smoother.
Your timer might have the following buttons: Mode, Hour, Minute, Set, and Run. The display shows the set time, and the pump operates according to the programmed schedule.
Identifying Your Timer Type
Hayward Pool Pumps come with two types of timers: Traditional and Touchpad. Familiarize yourself with your specific timer type to follow the correct steps:
- Traditional Timers: These have physical buttons and usually a LCD screen.
- Touchpad Timers: These have a touch screen for an intuitive, user-friendly interface.
Preparing Your Pool Pump for Timed Operation
Maintain your pool pump and its timer for optimal performance. Firstly, ensure all components are cleaned of any debris. Next, double-check that your pump and timer are compatible.
If you've recently installed your pool pump, ensure it's properly primed and leak-free before setting the timer.
Programming Your Hayward Pool Pump Timer
Now that you're familiar with your timer and have prepared your pool pump, it's time to set your desired running schedule. Here's how to do it for both Traditional and Touchpad timers:
Setting up a Traditional Timer
- Press and hold the Mode button until the display shows "PROG".
- Using the Hour and Minute buttons, set your desired start time. The display will show "ON" at the set time.
- To add an additional run period, press the Set button. Repeat steps 2-3 for your second run time. The display will show "ON2" for the second run period.
- Once you've set your desired run times, press the Run button to save your settings and start the pump according to your programmed schedule.
Setting up a Touchpad Timer
- Press the PROG button to enter programming mode.
- Using the Up and Down buttons, navigate to the start time you want to set and press SET.
- Enter your desired run time using the numerical keypad. To add a second run time, repeat steps 2-3.
- Once your run times are set, exit programming mode by pressing the ON/OFF button. Your pump will start running according to your programmed schedule.
Periodically review and adjust your timer settings to ensure your pool pump performs efficiently and maintains your pool water's quality. Happy swimming!