Reverse Frigidaire Refrigerator Door: Easy Step-by-Step Guide
Ever faced the conundrum of your Frigidaire refrigerator doors not opening properly? It's a common issue that can usually be rectified with a bit of troubleshooting and minor adjustment. Reverse doors on a Frigidaire refrigerator can be due to hydraulic door controls or improper leveling, and learning to adjust these can undoubtedly save you money in service calls or equipment replacement. Let's dive into a step-by-step guide on how to reverse the doors on a Frigidaire refrigerator.
If your refrigerator doors are reversed, chances are, the causando factor is either the hydraulic door control or the refrigerator's leveling. Both issues are more common than you think, and they can be fixed relatively easily. So, let's get started.
Hydraulic Door Control Adjustment
The hydraulic door control, or door reverse switch, regulates how the doors open and close. If this is malfunctioning, you might encounter reversed door issues.
Let's explore how to adjust the Frigidaire refrigerator hydraulic door control step by step.
Locating the Switch
On most Frigidaire refrigerators, the door reverse switch is located behind the back access panel, which you can access by removing the service panel at the bottom-right corner of the refrigerator.
Once you've got access to the switch, you're ready to proceed with the adjustment. If you’re unsure about any part of this process, don’t hesitate to consult your Frigidaire refrigerator manual or contact a professional for assistance.
Adjusting the Switch
The switch should have three settings: off, open door first, and close door first. Typically, with the left door opening first, the switch is set to "off." If your top hinge door opens first instead, it should be set to "open door first." If your bottom hinge door opens first, it needs to be switched to "close door first."
Adjust the switch according to your door opening preferences. Remember that moving the switch requires a screwdriver. After adjusting, test the doors’ functionality to verify they're opening and closing as desired. If adjustments don't help, the switch might be faulty and would need replacing.
Leveling Your Refrigerator
Improper leveling can lead to issues with door alignment and cause them to open or close incorrectly. Thus, leveling your refrigerator is essential to ensure proper function and longevity.
Leveling your Frigidaire refrigerator is a straightforward process that can correct door reversal issues. Here's a quick guide:
Checking the Level
For safety and accuracy, start by unplugging your refrigerator. Use a level to check that the floor is level. If not, you might need to adjust your refrigerator's location or the area under it.
After ensuring the floor is level, place your level on top of the refrigerator to check its level. If it's not level, you need to adjust the feet. Most Frigidaire refrigerators have adjustable feet at the bottom of each corner.
Adjusting the Feet
Turn the screws at the bottom of each leg clockwise to raise the refrigerator or counterclockwise to lower it. Continue adjusting until the refrigerator is level in both directions. Once leveled, plug your refrigerator back in and test the doors to assure they're functioning correctly.
By following these steps, you should be able to reverse your Frigidaire refrigerator doors. However, if you're unsure about any aspect of the process or find that your doors are still not functioning correctly, please don't hesitate to consult a professional for guidance. Happy reverse Engineering!