how to resync a ps4 controller

FIX: How to Fast and Efficiently Resync your PS4 Controller

By Brian Jones
AD

psicially disconnecting a controller from your PS4 can sometimes lead to synchronization issues. If you're experiencing such problems, you might need to resync your PS4 controller. Resyncing, also known as re-pairing, is a simple process that helps Refresh the connection between your console and controller. Let's guide you through the process with step-by-step instructions.

Before we dive in, let's clarify that this process is different from updating your PS4 controller's firmware. Resyncing is about reconnecting the controller to your PS4, while firmware updates ensure both are running the latest software for optimal performance. Now, let's get started!

Before You Begin

To prepare for resyncing, make sure your PS4 is turned off. This ensures a clean slate for the resync process. Also, ensure your controller is fully charged to avoid interruptions during the procedure.

AD
How to Pair PS4 Controller to PC Using Bluetooth
How to Pair PS4 Controller to PC Using Bluetooth
How To Connect PS4 Controller To iPhone
How To Connect PS4 Controller To iPhone
Does The PS4 Controller Have A Mic Built In? (Explained)
Does The PS4 Controller Have A Mic Built In? (Explained)

Next, locate the reset button on your PS4 controller. This small pinhole-sized button is usually located at the back of the controller, near the L2 shoulder button. You'll need a small object like a toothpick or a pen tip to access it.

Power Off Your PS4

First, turn off your PS4. You can do this by pressing the PS button on the controller, then selecting 'Power' > 'Turn Off PS4'. Alternatively, hold down the power button on the console for about 5 seconds until it beeps twice and turns off.

PS4 CONTROLLER WONT CONNECT *HOW TO FIX*
PS4 CONTROLLER WONT CONNECT *HOW TO FIX*
How To Fix Drift On PS4 & PS5 Controller [2021]
How To Fix Drift On PS4 & PS5 Controller [2021]

If your PS4 is in rest mode or safe mode, quit these modes by selecting 'Quit' or 'Leave' before proceeding.

Locate and Access the Reset Button

The reset button is a small pinhole near the L2 button on your PS4 controller. Use a small object like a toothpick or a pen tip to press and hold this button for about 5-7 seconds. After that, the light bar on your controller will begin to flash.

AD

Once the light bar starts flashing, release the reset button. This indicates that the controller is now in resyncing mode and ready to be reconnected to your PS4.

Resyncing the Controller to Your PS4

Now that your controller is in resyncing mode, it's time to connect it back to your PS4. You can do this via Bluetooth or using a USB cable.

If you're using Bluetooth, ensure that your PS4 controller is in pairing mode. Look at the light bar on your controller; it should be flashing. Once your controller is in pairing mode, follow these steps:

AD

Using Bluetooth

On your PS4 console, navigate to 'Settings' > 'Devices' > 'Bluetooth Devices'. Under 'Device Categories', select ' germline' (or whichever device represents your controller) to connect.

If your controller doesn't appear in the devices list, ensure it's in pairing mode and try again. Once connected, the PS4 will initiate the resync, and your controller should now be working as usual.

Using a USB Cable

Connect your PS4 controller to your console using a USB cable. Then, press the PS button on the controller to turn it on. If the resync process is successful, your controller should work normally again.

AD

After a successful resync, you can disconnect your controller from the USB cable and use it wirelessly. Ensure the USB cable is at least 2m (6.6 ft) long to avoid signal interference.

Congratulations! You've successfully resynced your PS4 controller with your console. If you encounter any further issues, make sure your PS4 and controller are both updated to the latest firmware, and consider attempting a hard reset on both devices. Enjoy your gaming!

AD