how to resurface over exposed aggregate concrete

Revive Your Driveway: How to Resurface Exposed Aggregate Concrete

By William Brown
AD

Over time, exposed aggregate concrete can become worn, faded, or stained, detracting from its once-beautiful appearance. Rather than replacing it entirely, resurfacing is an affordable and effective solution. This process involves renewing the surface layer of your concrete, revealing fresh aggregate and restoring its charm. Here's a comprehensive guide on how to resurface exposed aggregate concrete.

First, let's understand how exposed aggregate concrete wears down. The top layer of sealant and surface mortar gradually breaks down due to weathering, foot traffic, and vehicle movement. Once this protective layer is gone, the underlying aggregate is exposed, leading to further deterioration. Resurfacing stops this cycle, reinstates the concrete's longevity, and reveals the beauty of the aggregate again.

Preparation: Checking and Cleaning the Surface

Inspect your concrete for any signs of considerable damage or instability. For minor cracks, resurfacing is an excellent solution, but if the damage is severe, consider hiring a professional. Next, clean the surface thoroughly to ensure the new coating adheres properly.

AD
How To Cover Aggregate Concrete: 11 Resurfacing Ideas | Orlandi
How To Cover Aggregate Concrete: 11 Resurfacing Ideas | Orlandi
Why choose exposed aggregate concrete
Why choose exposed aggregate concrete
How To Resurface Exposed Aggregate Pool Deck with COOL Pool Deck Coating
How To Resurface Exposed Aggregate Pool Deck with COOL Pool Deck Coating

Start by removing any dirt, debris, or weeds using a stiff broom, scraper, or pressure washer. If there's oil or grease, use a suitable concrete cleaner. For stubborn stains, use a mixture of water, bleach, and a small amount of detergent. After cleaning, allow the surface to dry completely before proceeding.

Removing the Top Layer

The top layer of your concrete is likely to have absorbed moisture, oil, and other contaminants over time. Removing this layer will provide a clean slate for the new surface. Lightly grind or scarify the surface using a rented power grinder or scarifier. Don't remove too much material, as this could compromise the structural integrity of the concrete.

Exposing the aggregate
Exposing the aggregate
a man kneeling down to put something in the ground with his hand on top of it
a man kneeling down to put something in the ground with his hand on top of it

Use a vacuum or broom to clean up the dust and debris from the grinding or scarifying process. You may also want to apply a primer or bonding agent at this stage to improve the adhesion of the new overlay. Follow the manufacturer's instructions for application and drying times.

Repairing Cracks and Voids

Before applying the new surface, repair any cracks or voids in the concrete. For small cracks, apply a concrete crack filler using a caulking gun. For larger cracks or voids, use a concrete repair mortar mix. Allow the repair material to dry completely before proceeding.

AD

Flexibility is key when working with concrete. To accommodate movement and prevent future cracks, use a flexible, polymer-modified overlay for resurfacing. These overlays can move with the underlying concrete, reducing the risk of new cracks forming.

Applying the New Surface Layer

Now that your surface is clean, dry, and primed, it's time to apply the new overlay. Choose a product specifically designed for exposed aggregate surfaces, with a grit or aggregate that matches or complements your existing concrete.

Mix the overlay according to the manufacturer's instructions. Working in small sections at a time, apply the mix using a trowel or squeegee. Spread the overlay evenly, ensuring the aggregate is well distributed and fully exposed. Use a Bush hammer or similar tool to lightly texture the surface, mimicking the look of freshly poured concrete.

AD

Sealing the New Surface

Once the overlay has dried, apply a sealant to protect the new surface and enhance its color and texture. Choose a sealant designed for exposed aggregate surfaces, as it will provide better protection against moisture, UV, and chemicals. Follow the manufacturer's instructions for application and drying times.

Applying multiple thin coats of sealant (three to five coats, spaced 24 hours apart) will provide better protection than one thick coat. After each coat, allow the sealant to dry, then gently wipe off any residue with a damp cloth. Always test the sealant on a small, inconspicuous area first to ensure it's compatible with your new overlay.

Your newly resurfaced exposed aggregate concrete will look as good as new and be protected for years to come. Regular maintenance, including cleaning and reapplying sealant every couple of years, will keep it looking its best. Resurfacing is a practical way to restore and enhance your concrete's appearance, saving you time and money compared to replacement or repair. So go ahead, enjoy your renewed surface, and consider resurfacing as an option when your concrete next needs a refresh.

AD
AD