how to resurface an anvil

Resurface Anvil Like a Pro

By Michael King
AD

Resurfacing an anvil, a crucial tool in forging and blacksmithing, can extend its lifespan and restore its functionality. This process involves removing the worn-out surface and renewing it, ensuring optimal performance. In this comprehensive guide, we'll walk you through the process, from preparing your anvil to the final polishing, guaranteeing a smooth, professional finish. Let's dive in.

Before we begin, it's essential to understand that anvil resurfacing isn't a complex task, but it does require the right tools, patience, and careful handling. This guide assumes you have a basic understanding of metalworking and access to some essential tools such as a grinder, abench vise, flat files, and safety equipment like gloves and safety glasses.

Preparing Your Anvil for Resurfacing

The first step in resurfacing your anvil is preparing it for the process. This involves cleaning it thoroughly and securing it in a vise for safe and stable working during the resurfacing process.

AD
Lightly Restore an Anvil
Lightly Restore an Anvil
How to Repair An Anvil: Resurface An Anvil for Optimal Anvil Restoration
How to Repair An Anvil: Resurface An Anvil for Optimal Anvil Restoration
How to Repair An Anvil: Resurface An Anvil for Optimal Anvil Restoration
How to Repair An Anvil: Resurface An Anvil for Optimal Anvil Restoration

Use a wire brush or a scraper to remove any loose scale or rust from the surface. This will give you a clean starting point and prevent any debris from damaging the cutting tools you'll be using later.

Securing the Anvil in a Vise

Safety is paramount when resurfacing an anvil. Secure your anvil in a sturdy bench vise to prevent it from moving during the resurfacing process. Ensure the anvil is well-balanced and secure before proceeding.

How To Bring an Old Anvil Back to Life in 6 Simple Steps
How To Bring an Old Anvil Back to Life in 6 Simple Steps
Anvil Surgery ~ RESTORATION & REPAIR ~ NEW life for an OLD anvil!
Anvil Surgery ~ RESTORATION & REPAIR ~ NEW life for an OLD anvil!

Alternatively, if your anvil is too large for a bench vise, you can create a makeshift vise using a pair of heavy-duty clamps and a sturdy workbench. Ensure the workbench is stable and the clamps are secure before starting.

Protecting Surrounding Areas

Resurfacing an anvil generates sparks and metal shavings. To protect your workspace and yourself, cover the surrounding area with a fire-resistant blanket or sheet. This will minimize the risk of stray sparks starting a fire or causing damage.

AD

Additionally, wear appropriate safety gear, including safety glasses, gloves, and a face shield to protect your eyes and face from flying debris.

Removing the Old Surface

With your anvil securely fastened and your workspace protected, it's time to remove the old, worn-out surface. This can be done using a grinder or an abrasive cutting tool like a cutoff saw.

Here, we'll focus on using a grinder, as it's the most common and efficient tool for resurfacing anvils.

AD

Using a Grinder to Remove the Old Surface

Before you start, ensure your grinder is in good working condition and that the grinding wheel is appropriate for metal cutting. Securing a cutoff wheel with a durable, fiber-tipped center is ideal for this task.

Slowly pass the grinder over the anvil's surface, applying steady pressure. Work in even, overlapping stripes, maintaining a consistent distance from the surface. Always wear safety equipment, and keep the grinder steady to avoid creating deep grooves or damaging the anvil's base.

Refining the Cut with a Flat File

After removing the majority of the old surface, switch to a flat file to refine the cut. This step helps smooth out any rough edges or imperfections left by the grinder.

AD

Choose an appropriately sized flat file, and rub it against the anvil's surface in long, smooth strokes. Work along the grain of the metal, and use a bit of oil to lubricate the process. This will help remove any remaining burrs and create a smoother surface.

Resurfacing the Anvil

Now that you've removed the old surface, it's time to resurface your anvil. This involves adding a new, fresh layer of metal to the anvil's surface using a welding machine.

Before proceeding, ensure your welding machine is in good working condition. For this process, you'll need metal suitable for welding onto the anvil, such as high-carbon steel. The metal should be pre-heated to around 200°F (93°C) to facilitate welding.

Welding the New Surface

Position the pre-heated metal plate on the anvil's surface, ensuring it's centered and aligned correctly. Slowly weld along the edges of the plate, using a consistent speed and weld size. Avoid welding directly onto the anvil surface, as this can cause warping and overheating.

As you weld, maintain a consistent distance from the surface to avoid creating excessive heat, which can lead to warping and weaken the anvil's structure. Weld in even, steady strokes, and keep your welding machine clean to ensure the best results.

Cooling and Straightening

After welding, allow the anvil to cool slowly and naturally. A rapid cool-down can cause warping and weaken the weld. Once cooled, inspect the anvil for any signs of warping or irregularities.

If necessary, use a straightening iron or a large hammer to gently tap the anvil's surface to correct any warping. Work carefully and gradually, ensuring you don't damage the weld or cause further warping.

Finishing the Resurfaced Anvil

The final stages of resurfacing your anvil involve cleaning, annealing, and polishing, which help restore its original functionality and give it a professional finish.

Here, we'll use a simple three-step process that ensures your anvil is ready for use.

Cleaning the Anvil Surface

Use a wire brush or a scraper to remove any remaining welding slag or debris from the anvil's surface. This step is crucial as it ensures a clean starting point for the subsequent annealing and polishing processes.

You can also use a pickle bath for a more thorough cleaning. This involves immersing the anvil in a solution of 15% hydrochloric acid and water for 10-15 minutes. This will help remove any remaining scale and prepare the surface for annealing.

Annealing the Anvil

Annealing is a heat-treating process that helps restore the metal's original properties, making it softer and more malleable. This step is crucial for resurfaced anvils, as the welding process can alter the metal's structure and hardness.

Preheat your anvil gradually, using a forge or a propane torch. Heat it to around 1400°F (760°C), maintaining a consistent temperature for about an hour. After heating, allow the anvil to cool slowly and naturally.

Polishing the Anvil Surface

The final step in resurfacing an anvil is polishing the surface. This gives your anvil a smooth, professional finish and ensures it's ready for use.

Start with a coarse grit sandpaper, and work your way up to finer grits. Use a circular motion, applying steady pressure and working in even, overlapping strokes. As you polish, periodically dip the sandpaper into water to keep it clean and prevent clogging.

Finally, use a buffing wheel and a polishing compound to achieve a shiny, smooth surface. Work carefully and patiently, ensuring the entire surface is evenly polished. Once done, your resurfaced anvil is ready for use and should provide many more years of reliable service.

AD