how to reset water filter light on lg refrigerator

Reset LG Fridge Water Filter Light: Step-by-Step Guide

By William Martinez
AD

Is your LG refrigerator's water filter light stuck on or blinking? It may be time for a filter change, but first, let's address the issue with your light. Resetting the water filter light on an LG refrigerator is a straightforward process. Here's a step-by-step guide to help you through it.

Before we dive into the reset process, remember that this guide is for LG refrigerators with a water filter light indicator located on the front, typically near the door. If your model doesn't have this feature, the reset process might differ.

Understanding Your LG Refrigerator's Water Filter Light

LG refrigerators use a sensor to monitor the water filter's condition. The light indicates when it's time to replace the filter or when there's an issue with the filter reset. Here's what each light status means:

AD
How to replace water filter on LG refrigerator - How to Reset change filter indicator light
How to replace water filter on LG refrigerator - How to Reset change filter indicator light
how to reset lg refrigerator water filter light
how to reset lg refrigerator water filter light
How To Reset The Filter Light On Any Samsung Refrigerator (easiest way)
How To Reset The Filter Light On Any Samsung Refrigerator (easiest way)
  1. Solid Blue Light: The filter is fresh and working correctly.
  2. Blinking Blue Light: It's time to replace the filter.
  3. Blinking Red Light: There's an error with the filter reset or installation.
  4. Solid Red Light: The filter reset has been successful.

Resetting the Water Filter Light on an LG Refrigerator

Now that you understand the light indicators, let's proceed with resetting the water filter light. This process involves changing the filter and then resetting the light. If the light continues to blink after following these steps, there might be a problem with your filter or the reset mechanism.

LF if your refrigerator has a water dispenser, ensure it's turned off before starting. Also, have a new filter on hand, as you'll need to replace the old one during the reset process.

How To Reset Filter Light On Whirlpool Refrigerator
How To Reset Filter Light On Whirlpool Refrigerator
a man is pointing at the water dispenser in front of his refrigerator
a man is pointing at the water dispenser in front of his refrigerator

Changing the Water Filter (Before Resetting the Light)

  1. First, locate the water filter housing, usually situated in the top-right corner of the refrigerator, behind the bottom grill.
  2. Turn the filter counterclockwise to remove it. You'll hear a clicking sound, and the filter will unscrew easily once it's released.
  3. Remove the old filter and discard it. Don't reuse old filters, as they can harbor bacteria and contaminants.
  4. Rinse the new filter under running water for 5-10 seconds to remove any loose carbon particles.
  5. Insert the new filter by aligning the arrow on the filter with the arrow on the housing. Turn the filter clockwise until it stops (around 2-3 full turns).
  6. After installation, turn on the ice maker and dispenser to flush out any air in the lines. Continue resetting the light as instructed below.

Resetting the Water Filter Light on Your LG Refrigerator

Now that you've replaced the water filter, it's time to reset the light indicator.

LG recommends resetting the light when you first install a new filter and after every six months – or when the light indicates a filter change is needed.

AD

Manual Water Filter Reset (Using the Control Panel)

  1. Press and hold the 'Filter Reset' button (if present) on the control panel for 3-5 seconds. This button is usually labeled with a water drop icon. If your refrigerator doesn't have a dedicated 'Filter Reset' button, proceed to the next step.
  2. Follow these steps using the control panel:
    • Press and hold the 'Ice Type' button (usually labeled with an ice cube icon) for 3-5 seconds.
    • Press the 'Lighting' button (usually labeled with a lightbulb icon) once.
    • Press the 'Filter' button (usually labeled with a water drop icon) once.
    • Press the 'Cancel' button to exit the settings menu.
  3. After completing the reset process, the light should turn solid blue, indicating that the reset was successful.

Automatic Water Filter Reset (Using the App)

If your LG refrigerator is equipped with the Smart Diagnosis feature and the LG ThinQ app, you can reset the water filter light using your smartphone. Here's how:

  • First, install and open the LG ThinQ app on your smartphone.
  • Sign in to your account or create a new one if you haven't already.
  • Select your LG refrigerator model from the list of connected devices.
  • Tap on 'Smart Diagnosis' in the app's main menu.
  • Scroll down and select 'Water Filter' from the list of available tests.
  • Follow the on-screen instructions to complete the reset process. After successfully resetting the light, the app will display a 'Completed' message.

Your LG refrigerator's water filter light is now reset, and your fresh, clean water is ready to enjoy. Regularly replacing the water filter and resetting the light will keep your refrigerator running efficiently and ensure you always have access to purified water.

Should you encounter any issues or have further questions about your LG refrigerator's water filter, don't hesitate to consult the user manual or contact LG's customer support for assistance. Happy resetting!

AD
AD